Where is the cheapest place to get a slave cylinder?
#1
TECH Apprentice
Thread Starter
iTrader: (84)
Join Date: Jun 2007
Location: Cleveland, TX.
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
Where is the cheapest place to get a slave cylinder?
I want a 2001 or 2002 slave cylinder for a f-body. where to get it? My mom works at chevy and with her discount its still like 180 dollars
#6
TECH Apprentice
iTrader: (2)
Join Date: Feb 2008
Location: St. Pete, FL
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Yep, that's where I got my clutch/flywheel too.. I think $398 for the clutch/flywheel and another $90 or so for the hydraulics.
I originally tried ordering it from fred beans and i HATED them. First, they tried charging me like $100 for shipping it by UPS ground -- SD charges only $35.
Second, I ordered the part Sunday night, and I called monday to make sure they had it out that day, because I needed my car finished.. and they said they would do it. Called back on tuesday to double check that it was sent out.. and the guy was like - "We didn't send it out yet, what do you want me to do about it? We'll get it out today or tomorrow if we get around to it".
So I cancelled with them, and called up SD and they had it out the same day for a much better price!
I originally tried ordering it from fred beans and i HATED them. First, they tried charging me like $100 for shipping it by UPS ground -- SD charges only $35.
Second, I ordered the part Sunday night, and I called monday to make sure they had it out that day, because I needed my car finished.. and they said they would do it. Called back on tuesday to double check that it was sent out.. and the guy was like - "We didn't send it out yet, what do you want me to do about it? We'll get it out today or tomorrow if we get around to it".
So I cancelled with them, and called up SD and they had it out the same day for a much better price!
#7
Yep, that's where I got my clutch/flywheel too.. I think $398 for the clutch/flywheel and another $90 or so for the hydraulics.
I originally tried ordering it from fred beans and i HATED them. First, they tried charging me like $100 for shipping it by UPS ground -- SD charges only $35.
Second, I ordered the part Sunday night, and I called monday to make sure they had it out that day, because I needed my car finished.. and they said they would do it. Called back on tuesday to double check that it was sent out.. and the guy was like - "We didn't send it out yet, what do you want me to do about it? We'll get it out today or tomorrow if we get around to it".
So I cancelled with them, and called up SD and they had it out the same day for a much better price!
I originally tried ordering it from fred beans and i HATED them. First, they tried charging me like $100 for shipping it by UPS ground -- SD charges only $35.
Second, I ordered the part Sunday night, and I called monday to make sure they had it out that day, because I needed my car finished.. and they said they would do it. Called back on tuesday to double check that it was sent out.. and the guy was like - "We didn't send it out yet, what do you want me to do about it? We'll get it out today or tomorrow if we get around to it".
So I cancelled with them, and called up SD and they had it out the same day for a much better price!
Trending Topics
#9
12 Second Club
iTrader: (2)
Not really. S/D has a LS7 kit that saves a good bit on the price of individual parts. Both S/D and GM partdirect are good pricing and fair shipping costs. However, there are a LOT of folks out there (especially ebay) with deceptive pricing and inflated shipping... which is why I spend my money with S/D or GMpartsdirect almost every time. Reliable shipping and doing what they say they will, when they say they will, is also important to me.
#12
anyway to verify if the NAPA slave is the same as the GM slave?.Like part numbers.Rebuilding my tranny and money is tight.If its the same it will save me some money.I just do not want to pay less and end up with a part that is not the same quality and reliability wise.
#17
TECH Addict
iTrader: (37)
Orielly's and Advance auto said they are discontinued dealer parts (master)
Advance Master is $121.. Orielly's is $71.. Auto zone's $91.99 auto zones slave is $91.99..
rockauto.com is $58 Master by wagner, Slave is $69 (loaded with TO).. by Raybestos
But nothing has lines does the line really have to be replaced??? ima just buy the master/slave from rock and do the drill mod...