Northern Illinois engine builder
#43
12 Second Club
iTrader: (20)
On the UPS trucks today and tomorrow are...
*Lunati link bar lifters
*Comp cam 243/259 .624 lift on both sides on a 114+3 using LsR lobes.
*Katech C5R timing chain
*melling h/p oil pump
*LPE Ls3 heads polished and ported heads on Comp 925 springs
*GM MLs head gaskets
*8 Ls3 offset rockers
*ARP Cam bolts
*ARP retainer bolts
*ARP Crank bolt
*ARP head bolts
*ARP Main Studs ( All ready on by AES)
*TSP 1 7/8 headers with the TSP Ypipe
I'll be putting it back together Friday, degreeing the cam, checking for ptv clearances and correct pushrod lengths because the heads have been milled for 12-1 compression.
*Lunati link bar lifters
*Comp cam 243/259 .624 lift on both sides on a 114+3 using LsR lobes.
*Katech C5R timing chain
*melling h/p oil pump
*LPE Ls3 heads polished and ported heads on Comp 925 springs
*GM MLs head gaskets
*8 Ls3 offset rockers
*ARP Cam bolts
*ARP retainer bolts
*ARP Crank bolt
*ARP head bolts
*ARP Main Studs ( All ready on by AES)
*TSP 1 7/8 headers with the TSP Ypipe
I'll be putting it back together Friday, degreeing the cam, checking for ptv clearances and correct pushrod lengths because the heads have been milled for 12-1 compression.
#48
TECH Fanatic
iTrader: (23)
no roll cage here--only a roll bar, full interior WITH radio and heat and wipers, slicks and skinnies....well hell guilty there. ROAD RACE corbeau seats, no lightweight kirkeys here.
no drag radials but a 4xx cube motor and a 9" zeke? why bother!!!
if my STOCK junkyard $800 longblock scares you, we need to have a talk
no drag radials but a 4xx cube motor and a 9" zeke? why bother!!!
if my STOCK junkyard $800 longblock scares you, we need to have a talk
#52
12 Second Club
iTrader: (20)
I bet you can't wait hu?
Well so far I got the crank sprocket on! Apparently Pace sent me a partial order because some of my parts like the Ls2 chain dampner and the Ls3 intake rockers are on ORDER. when i saw that the new cam retainer I apparently wasn't aware that GM changed their design and have counter sunk holes in them so you now need counter sunk bolts. Well I didn't get the memo from GM about that, so today when I called Pace they said that those bolts will take 3-4 more days. So now I'm just going to go somewhere that carries these items so I can get them shipped. Pace could of said hey we don't have this and that and that in stock so your going to have to WAIT. I'll try Byunspeed Monday to see if they have these things. I got the cam on Tuesday after ordering it on Sunday. That's Jimmy Johns fast delivery. I like that. LOL
#59
FormerVendor
iTrader: (6)
Could install victor jr LS3 intake otherwise. That combination would find you a good peak number.
Looking good!