Start up of my cammed Camaro
#1
Start up of my cammed Camaro
I finally put my cam and new 241 heads on. Cam is a TR227/224 114LSA, heads are 241 heads with dual valve springs, locks, seals and retainers, SLP U/D pulley. Other mods are LS6 intake with SLP Lid, SLP Smooth Bellow and SLP MAF. remember this is on a A4 and untuned it drives pretty damn good but with the LT's and 36lb injectors it'll be alot more fun!!!!!
ok here's the vid of the first start up
and here's where it finally found it's idle
ok here's the vid of the first start up
and here's where it finally found it's idle
#6
thanks bud
well f-body's didn't get 241 heads till mid production 2000, my 2000 SS was manufactured and built in aug of 99 so i had the glorious 853's which were having tremendous valve float. plus i got the 241 heads for hella cheap over a year ago and had em cleaned up and assembled for me for alot cheaper than a set of 243's. don't get me wrong i'd love to have at the least a set of stock 243's but i didn't have the cash then plus having these fully assembled heads now, i'd be retarded to get rid of them and put this project off any longer