Issues w/ 98RedWS6MI - Moser 9", Weld prostars, LS6 PCV, 6.0L block
11-28-2005, 11:24 AM
#1
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Dec 2004
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Issues w/ 98RedWS6MI - Moser 9", Weld prostars, LS6 PCV, 6.0L block Got some things for sale porject has changed so here it goes Im in Michigan about 40 miles west of detroit:
Moser 9" for a 93-02 Fbody, used for about 3,000 miles on a 355 RWHP car never had anything other than street tires plans have changed so this will go. Spohn Sway bar and Spohn Sway bar mounts, this is for a 4 channel car with TCS and has the ABS sensors installed as well as brake plates and calipers, tis can be used on a car Without Traction control without any problem. Has a 3.50 rear gear, 35 spline axles and Posi unit. Moser Axles. Yoke is for a stock Driveshaft. Has torque arm mount exactly as pictured
$1750 + shipping SOLD SOLD
Weld Rear wheels 7.5" backspace bought from blkmd98z a few weeks ago include spacers, lugnuts, center caps these are 15x10 and are in great shape ill have the fronts for sale in a few days also. $375 shipped.
ARP LS1 Main studs, new never torqued down but were installed on a block. 12 pt. nuts. New condition.
$125 shipped to your door
ARP LS1 Head stud kit for the 97-03 LS1's brand new in the box. 234-4316
$190 shipped. SOLD SOLD SOLD
Carillo Connecting rods, these are their most expensive ls1 style rod. These are the H-beams and include there awesome bolts Carr SPS37 The retail on these things is nuts. This is the same rod that Hardcore motorsports uses, these have about 10 minutes of dyno time on them and if i dint tell you you'd think they were new absolutely perfect in every way. $750 shipped
LS6 valley cover and complete PCV conversion for non-ls6 cars has the LS6 vapor plugs and line, as well as the custom PCV valve you have to make to use this on our cars. will let it go for $110 shipped SOLD SOLD SOLD
BMR Race LCA's converted for street use you can use them as is or buy the rod ends for the other side. Good used shape few scratches but perfect otherwise. $150 shipped
BMR xtreme duty strut tower bar. Good shape nice paint $100 shipped
Moser 9" for a 93-02 Fbody, used for about 3,000 miles on a 355 RWHP car never had anything other than street tires plans have changed so this will go. Spohn Sway bar and Spohn Sway bar mounts, this is for a 4 channel car with TCS and has the ABS sensors installed as well as brake plates and calipers, tis can be used on a car Without Traction control without any problem. Has a 3.50 rear gear, 35 spline axles and Posi unit. Moser Axles. Yoke is for a stock Driveshaft. Has torque arm mount exactly as pictured
$1750 + shipping SOLD SOLD
Weld Rear wheels 7.5" backspace bought from blkmd98z a few weeks ago include spacers, lugnuts, center caps these are 15x10 and are in great shape ill have the fronts for sale in a few days also. $375 shipped.
ARP LS1 Main studs, new never torqued down but were installed on a block. 12 pt. nuts. New condition.
$125 shipped to your door
ARP LS1 Head stud kit for the 97-03 LS1's brand new in the box. 234-4316
$190 shipped. SOLD SOLD SOLD
Carillo Connecting rods, these are their most expensive ls1 style rod. These are the H-beams and include there awesome bolts Carr SPS37 The retail on these things is nuts. This is the same rod that Hardcore motorsports uses, these have about 10 minutes of dyno time on them and if i dint tell you you'd think they were new absolutely perfect in every way. $750 shipped
LS6 valley cover and complete PCV conversion for non-ls6 cars has the LS6 vapor plugs and line, as well as the custom PCV valve you have to make to use this on our cars. will let it go for $110 shipped SOLD SOLD SOLD
BMR Race LCA's converted for street use you can use them as is or buy the rod ends for the other side. Good used shape few scratches but perfect otherwise. $150 shipped
BMR xtreme duty strut tower bar. Good shape nice paint $100 shipped
Last edited by 98RedWS6MI; 11-29-2005 at 02:28 AM.
11-28-2005, 11:26 AM
#2
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Dec 2004
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
6.0L Iron block in perfect shape. This block has been rough bored .015 over i had intended to shoot it over .030 but plans change and money runs out. It is perfect no rust in cylinders and mains are perfect will include bolts. Block is nice and ready to go will need nothing other than a finish bore, all other items are perfect has new Federal Mogul Race Cam bearings installed. $400 pkus shipping
All prices are pretty firm let me know pm me or email me or call me at 248-444-6925 let me know
thanks
All prices are pretty firm let me know pm me or email me or call me at 248-444-6925 let me know
thanks
11-28-2005, 11:33 AM
#3
Restricted User
iTrader: (207)
Join Date: Aug 2005
Location: jacksonville, fl.
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
i could really use that moser. but with christmas and all $ is pretty tight. interested in a trade? i have a decent looking wife i would be willing to part with.
Trending Topics
11-28-2005, 03:42 PM
#9
TECH Apprentice
iTrader: (29)
Join Date: Aug 2002
Location: BIG State of TEXAS
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WS6nJAX
i could really use that moser. but with christmas and all $ is pretty tight. interested in a trade? i have a decent looking wife i would be willing to part with.
I might just have a some extra cash for you this holiday season ....
11-28-2005, 07:00 PM
#11
TECH Addict
iTrader: (2)
Join Date: Jul 2004
Location: Ahwatukee, Az
Posts: 2,333
Likes: 0
Received 0 Likes
on
0 Posts
would you be willing to do a package deal on the fronts and backs for the prostars?
Will it fit my T/A without moddifying anything?
Please email me at alanskora@hotmail.com
Thank you.
Will it fit my T/A without moddifying anything?
Please email me at alanskora@hotmail.com
Thank you.
Last edited by 2000 Tran Zam; 11-28-2005 at 07:23 PM.
11-28-2005, 07:25 PM
#13
TECH Fanatic
iTrader: (1)
Join Date: Nov 2003
Location: Jackson MI
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
I'm thinking of the rims, and then the next question is how much if I pick them up? PM me. Also, you note that you'll have the fronts available soon, let me know how much you're thinking for those as well.
11-28-2005, 09:15 PM
#16
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Dec 2004
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Pm's responded to Rear end is sold, For the wheels only the fronts have tires rears are bare you will have to do some caliper grinding to get them to fit i only have 2 spacers with them. For the whole package ill go $575 + shipping. Thanks
Chris
Chris
11-28-2005, 09:17 PM
#17
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Dec 2004
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Valley cover is still for sale no dibs first with cash gets all items. My paypal is findindeals12345@hotmail.com
Thanks
Thanks
