Marcel1500

I have a 2000 camaro ss and through purchasing used exhaust parts my catback is short an I pipe. It's a magnaflow catback. The previous owner let the I pipe go with the Y pipe. I l know its a 3" piece. Is there any place I can buy it seperate?

RevGTO

iTrader: (12)

Summit sells a Walker/Dynomax piece. I've used it on both my cars.

Marcel1500

Cool I'll check that out....

Marcel1500

You don't happen to have a part number do you? I found a bunch of different intermediate pipe but nothing specific.

bad_408_vert

iTrader: (6)

you can just ask the exhaust place to supply an I pipe while they are welding the rest of catback for you.

HVYMTL

NAPA part number 54064 should do the trick

99Bluz28

iTrader: (35)

If you want stainless steel then get a length of 3" diameter tubing (SUM-640130) and a single 60* bend (VPE-13072) total is about $85 shipped.
I found these both at Summit Racing.

GMtechmatt

dynomax it has all the 02 bungs welded in already

roninsonic

iTrader: (3)

any decent exhaust shop should be able to hook you up.

30th t/a

iTrader: (51)

summit just old me today that the I pipe was discontinued

Marcel1500

I'm going to install my LT headers and Y pipe as well as the catback minus the "I" pipe.I think I'm just going to have the I pipe "made" at the exhaust shop. I'll let you guys know what it cost me. I should get this done in the next week or 2.

99Bluz28

iTrader: (35)

I'd at least buy the 60* mandrel bend, so you don't end up with a 60* crush bend.
Also most shop just carry aluminized steel not Stainless steel so if you want it all SS then I'd also order the length of 3" pipe I listed; unless your exhaust shop carries stainless steel.