high impact

iTrader: (5)

I am installing my bottle, lines and solenoids on my Formula. The 90mm plate won't work with my 102 Fast and 92mm Big Mouth TB so I am wondering what side are the feed lines on the 102 plate? I am wanting to install my noids on the passenger side and feed the passenger side of the plate. I have found pictures on the net showing the inlet on both sides of the 102 plate.

I will be selling my 90mm plate and purchasing a 102 plus the braided feed lines ASAP. Thanks!

03EBZ06

thats interesting. I have a stock 90mm TB on my Fast 102 right now.

high impact

iTrader: (5)

What's interesting? The throttle body works fine. It's the plate that won't work.

03EBZ06

feed lines on a Nitrous Outlet 102 plate are on the driver's side.

high impact

iTrader: (5)

Thank you! ;-) I was hoping they were on the passenger side, I will have to extend my braided lines from the noids then since I mounted everything on the passenger side tonight

brandon6.0

iTrader: (32)

They could possibly build one like your wanting. If not longer lines should do the trick

Chopstix

iTrader: (1)

call them...they likely can just re-drill the existing plate for new line mounting locations.

brandon@nitrousoutlet

iTrader: (2)

Our FAST 102 Truck plate has the inlets on the passenger side. http://www.nitrousoutlet.com/nitrous...onversion.html

high impact

iTrader: (5)

Would the truck plate work? I called today and was told the truck intake would not work on the fbody. Sounds like I will have to get longer braided lines and loop them around.

brandon@nitrousoutlet

iTrader: (2)

I'm not sure I understand your quiestion. The Truck plate will work as it places the inlets on the passenger side where your solenoids are. I think you and John had a mis-communication. Just call me and I'll get you the right stuff.