blk00ss

iTrader: (66)

Currently have some BR7EF's in the car gapped at .035. Would these work for a 100-150 shot? I have a set of the B8EFS I can put in. But would rather not have to if anyone has experience running the 7's on a similar setup?

HCI2000SS

iTrader: (2)

Try a hit or two then pull the plugs and see. Should be ok

blk00ss

iTrader: (66)

Anyone else?

brandon@nitrousoutlet

iTrader: (2)

Can you give us some more info on your combination? Compression, fuel, horsepower numbers NA will help.


Edit: Missed the compression in the title. Still would like a little more info on the motor.

NitrousExpress

iTrader: (4)

We have had numerous customers with similar setups running the 7's spraying under 200hp but if you wanted to be on the safer side of the line you might go with the 8's. As far as the gap goes any where from 23-25 is fine.


-Chris

blk00ss

iTrader: (66)

TFS 235's with FRH 245 CNC job
Cam is a 251/263 .678/.680 111+2
2" kooks headers
It is 12:1 compression on 93 octane
On motor it made 571/535 to the tires.

NitrousExpress

iTrader: (4)

12:1 is fine on BR7 plugs. If it was a little higher compression, then okay, might go 1 step cooler plug just as a precaution.

(2 steps cooler.)

Thanks,
Garrett

blk00ss

iTrader: (66)

Cool. Thanks!