First time nitrous user
07-03-2015, 05:45 PM
#1
Teching In
Thread Starter
Join Date: May 2015
Location: Whitehall, PA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
First time nitrous user So I finished my instal today of the proton plus kit i just tested it on a 50 shot to see what it would be like and I definitely felt it. I didn't have a chance to pull any timing which is why I only did 50. My only question is me and my buddy smelled something a little weird after spraying is that normal?
07-03-2015, 05:57 PM
#3
Teching In
Thread Starter
Join Date: May 2015
Location: Whitehall, PA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
I went over all the fittings and everything's tight no sign of leaks idk if there would be condensation around the fitting or anything though. I read some threads of some people saying they can smell it and some saying they can't.
07-03-2015, 10:29 PM
#4
TECH Fanatic
I never smell anything odd, but its damn near impossible that you hurt anything doing a 50 shot, if that's what your worried about.
But I do understand your caution.
I did the same thing.
Started at 50, then 75, etc.
But I do understand your caution.
I did the same thing.
Started at 50, then 75, etc.
07-03-2015, 11:59 PM
#5
Teching In
Thread Starter
Join Date: May 2015
Location: Whitehall, PA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
I'm not so worried I hurt anything since I didn't hear a knock or anything funny. I'm more worried about having a leak somewhere but I'm pretty sure I don't since everything tight it might just be the oil burning off the new cutouts I put in
Trending Topics
07-07-2015, 09:52 PM
#8
9 Second Club
iTrader: (9)
Join Date: Apr 2011
Location: Indian Rocks Beach Fl
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
So I finished my instal today of the proton plus kit i just tested it on a 50 shot to see what it would be like and I definitely felt it. I didn't have a chance to pull any timing which is why I only did 50. My only question is me and my buddy smelled something a little weird after spraying is that normal?
07-28-2015, 04:32 PM
#15
Teching In
Thread Starter
Join Date: May 2015
Location: Whitehall, PA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
The proton kit was really easy to put in and I didn't have any problems putting in my fpss or my window switch. It shows you have to wire everything up in the instructions. My car goes tomorrow to get tuned for the 100 shot I might even go 150 not sure yet.
07-28-2015, 09:41 PM
#17
Teching In
Thread Starter
Join Date: May 2015
Location: Whitehall, PA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
I just bought a fpss, rpm window switch, and a purge kit