pic of me leaving on a 250 shot!!
Trending Topics
#9
9 Second Club
Thread Starter
Join Date: Feb 2005
Location: ga
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
thanx alot guys. so far my best 60ft is a 1.32 it varys from low 1.30's to mid 1.30's depending on the track... when the track gets bad it is in the upper 1.30's low 1.40's
here are some motor specs....
406cid 12.9:1 comp
afr 227 heads, with additional porting
custom nitrous cam from motor machine using vizards' cam doctor
full forged eagle rotating assembly
tall single plane intake
quickfuel 950 carb
gemini twin spraybarless plate system
th350 transmission with one of my custom 4400 billet nitrous stall with 2.6 stator
stock 1le driveshaft
moser 9in. with 3.70 gears
raceweight is 3400 lbs
here are some motor specs....
406cid 12.9:1 comp
afr 227 heads, with additional porting
custom nitrous cam from motor machine using vizards' cam doctor
full forged eagle rotating assembly
tall single plane intake
quickfuel 950 carb
gemini twin spraybarless plate system
th350 transmission with one of my custom 4400 billet nitrous stall with 2.6 stator
stock 1le driveshaft
moser 9in. with 3.70 gears
raceweight is 3400 lbs
#13
9 Second Club
Thread Starter
Join Date: Feb 2005
Location: ga
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 02SOMWS6
Damn drew, was it a hard touch down?
It was a little hard but not hard enough to hit my headers or anything.... but it did ride them out to the 60ft
#17
TECH Junkie
iTrader: (23)
Join Date: Aug 2003
Location: Tallahassee, FL
Posts: 3,467
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by tuff
Its nice when you wheele and you don,t hurt anything.This was me yesterday on a 300 shot.And i wasnt so lucky this time on not hurting anything.