Paging Nitro Dave
#1
9 Second Club
Thread Starter
iTrader: (30)
Join Date: Apr 2004
Posts: 1,419
Likes: 0
Received 0 Likes
on
0 Posts
Paging Nitro Dave
Broke my filter trying to fix a leak (brute strength & ignorance) I need a fix by friday morning. Can you hook me up with a filter with a -4 on the inlet side & 1/4" or 1/8" npt male on the outlet side? This is the way I have mine setup, it screws directly into the noid (NX Iceman).
The noid is a 1/4" npt but I have an adapter to bring it down to an 1/8 so either would work. I will have to have this sent overnight?
Also I am running a 100 shot with your plate kit. It is pegging my WB at 10.0 or just above. Could I go with one size bigger with my N20 jet? Right now I have a 52 in there. I see on your web page that there is a 53.
The noid is a 1/4" npt but I have an adapter to bring it down to an 1/8 so either would work. I will have to have this sent overnight?
Also I am running a 100 shot with your plate kit. It is pegging my WB at 10.0 or just above. Could I go with one size bigger with my N20 jet? Right now I have a 52 in there. I see on your web page that there is a 53.
Last edited by code4; 06-06-2006 at 10:00 PM.
#4
FormerVendor
iTrader: (25)
Originally Posted by 67Ranger
call them tomorrow... I have never called, and not been able to talk to somebody. Their number is on their site.
Dave
#5
9 Second Club
Thread Starter
iTrader: (30)
Join Date: Apr 2004
Posts: 1,419
Likes: 0
Received 0 Likes
on
0 Posts
Yes, been very pleased with customer service by phone. Just wanted to post as well. I live in NW Montana and our car club is travelling 7 hours to a track in BFE this weekend (weather permitted). It's a big deal, & then I go & break the damn fitting.