It Runs...NM
#7
Well, I went out and reprogramed the DFI and the PCM with some basics. You know, turning off just about every code in the PCM and set the shift points. The DFI is all setup with the wideband and other fun toys...
So after playing with the basics, It pretty much cranked right up, Runs solid at 750 rpm and 40 psi of oil pressure.
Ryan Happy...
So after playing with the basics, It pretty much cranked right up, Runs solid at 750 rpm and 40 psi of oil pressure.
Ryan Happy...
Trending Topics
#8
Originally Posted by Ryan K
Well, I went out and reprogramed the DFI and the PCM with some basics. You know, turning off just about every code in the PCM and set the shift points. The DFI is all setup with the wideband and other fun toys...
So after playing with the basics, It pretty much cranked right up, Runs solid at 750 rpm and 40 psi of oil pressure.
Ryan Happy...
So after playing with the basics, It pretty much cranked right up, Runs solid at 750 rpm and 40 psi of oil pressure.
Ryan Happy...
j/k!
get a vid up soon!