Drove the Camaro to Bremerton Raceway..
07-06-2007, 10:07 PM
#1
Drove the Camaro to Bremerton Raceway.. Unfortunatly, I had to trailer it home.
I did get to make 3 1/2 passes though.
For the first three passes I ran off the wastegate at 9-10psi, at this boost level it dynoed about 630rwhp.
On the first pass, I left off idle and rolled out to a 1.928 60ft. LOL!
60ft 1.928
330ft 4.816
1/8th 7.143 @ 105.72mhp
1000ft 9.140
1/4 10.815 @ 134.89
On the second pass, I left abit harder, loaded up the converter abit.
60ft 1.695
330ft 4.532
1/8th 6.833 @ 106.53mph
1000ft 8.815
1/4 10.477 @ 135.97 mph
Left pretty much the same as the last pass.
60ft 1.738
330ft 4.510
1/8th 6.800 @ 107.25mph
1000ft 8.773
1/4 10.432 @ 135.91mph
Then on the next pass, I got kinda greedy... and upped the boost to 17psi (about 750 ish rwhp)
60ft 1.684
330ft
1/8th
MPH
1000ft
1/4
Right before the 60' the car attempted to perform the 1-2 shift... Thats all she wrote. I'll get it torn down in the next few days to see what popped, initial thought is input shaft to the trans.
Btw, this is with 17" ZR-1 wheels all the way around
Ryan K.
I did get to make 3 1/2 passes though.
For the first three passes I ran off the wastegate at 9-10psi, at this boost level it dynoed about 630rwhp.
On the first pass, I left off idle and rolled out to a 1.928 60ft. LOL!
60ft 1.928
330ft 4.816
1/8th 7.143 @ 105.72mhp
1000ft 9.140
1/4 10.815 @ 134.89
On the second pass, I left abit harder, loaded up the converter abit.
60ft 1.695
330ft 4.532
1/8th 6.833 @ 106.53mph
1000ft 8.815
1/4 10.477 @ 135.97 mph
Left pretty much the same as the last pass.
60ft 1.738
330ft 4.510
1/8th 6.800 @ 107.25mph
1000ft 8.773
1/4 10.432 @ 135.91mph
Then on the next pass, I got kinda greedy... and upped the boost to 17psi (about 750 ish rwhp)
60ft 1.684
330ft
1/8th
MPH
1000ft
1/4
Right before the 60' the car attempted to perform the 1-2 shift... Thats all she wrote. I'll get it torn down in the next few days to see what popped, initial thought is input shaft to the trans.
Btw, this is with 17" ZR-1 wheels all the way around
Ryan K.
07-06-2007, 10:56 PM
#5
Originally Posted by Ryan K
BTW, the car dead hooked everytime. I was just leaving soft.
Robert
07-06-2007, 11:21 PM
#6
10 Second Club
iTrader: (4)
Join Date: Feb 2004
Location: Marysville, WA
Posts: 9,448
Likes: 0
Received 0 Likes
on
0 Posts
Man, that thing is going to rock when you get it sorted out & get your racing tires on it. Hope it aint TOO serious....but at least you recalimed "your spot"! 
Trending Topics
07-07-2007, 12:29 AM
#10
Launching!
iTrader: (1)
Join Date: Oct 2005
Location: Spanaway, WA
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Aww man sorry to see it go down already... 
Did you have much street duty on the new setup, or just breaking it in at the track? Good luck with your new tranny. Maybe time for a 2 spd?
Did you have much street duty on the new setup, or just breaking it in at the track? Good luck with your new tranny. Maybe time for a 2 spd?
