BW S480 Turbo Kit, 5.3 Long Block, Vic Jr, EFI Elbow, Wilson 102MM TB, ETC.....
09-03-2013, 11:24 AM
#1
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jun 2012
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
BW S480 Turbo Kit, 5.3 Long Block, Vic Jr, EFI Elbow, Wilson 102MM TB, ETC..... Category: Engine - Power Adders
Price: $2500
Location (State): IL
Item Condition: Used
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Borg Warner S480 Turbo
Tial 44MM Wastegate 10lb spring
Tial 50mm BOV
Feed and Return Lines Included
Flipped Truck Manifolds
2.5" Cross Over
VBand Downpipe with O2 Bungs and WBO2 Bung
Chasis Brace for Turbo
WG Dump merges into Downpipe
3" A2A Intercooler
Cold Side Piping Coated
Hot Side Piping Coated
74lb High Z Fuel Injectors
If pick up is local I also have a custom fabricated vband dual exhaust that mates to the downpipe. Two big to ship the exhaust.
5.3 Long Block
Stock Short Block
743 Alum heads
Z06 Cam
ARP head studs
Texas speed push rods
Includes Oil pan with return line fitting and Feed Fittings
$1,100
PSI Conversion Harness & ECU with Tune
$300 for harness, $150 for ECU which includes above pump gas tune
Vic Jr, Elbow and Wilson TB
$750
This set up runs consistent 10.7 @ 131mph on the 10lb wastegate spring and 93 octane in my 92 notchback Mustang.
Only selling as I am moving to a bigger forged set up. For additional photos or questions please reach out to Jason - 773-717-0203
Trending Topics
09-06-2013, 09:16 AM
#8
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jun 2012
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Apologies for the delay's everyone. I have two gents interested in the whole set up. Logistically, this will be the easiest route. Hoping to have something firmed up today. If anything changes I will update this thread right away.
Jason
Jason
09-11-2013, 01:23 PM
#9
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jun 2012
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Intake Manifold, Elbow, TB and Fuel Rails are sold -
Turbo, W/G, BOV, I/C and Down Pipe are Sold
Hot side and Cold Side Piping is available for $350 Shipped. Includes Cast Iron Mani's, Cross Over, LICP and UICP pictured above.
Long Block is also available less Oil Pan for $800 Picked Up.
PSI Harness and ECU also still available although due to HIGH HIGH Demand price is now $600 Shipped.
Turbo, W/G, BOV, I/C and Down Pipe are Sold
Hot side and Cold Side Piping is available for $350 Shipped. Includes Cast Iron Mani's, Cross Over, LICP and UICP pictured above.
Long Block is also available less Oil Pan for $800 Picked Up.
PSI Harness and ECU also still available although due to HIGH HIGH Demand price is now $600 Shipped.
09-11-2013, 07:50 PM
#12
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jun 2012
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
@ RamonGTX - not 100% certain on miles. Previous owner said very low. I have put maybe 12 1/4 miles passes on it and maybe 1K street miles in the last year. Never misses a beat. Starts right up and runs very strong.
@meanls1fbta - It should but not 100% certain.
@meanls1fbta - It should but not 100% certain.
09-17-2013, 10:43 AM
#14
Teching In
iTrader: (1)
Join Date: Oct 2012
Location: NE
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Intake, Elbow, TB, Rails are paid for, waiting to receive via UPS.
Turbo, Wastegate, BOV, Intercooler will be paid once first shipment is received.
Jason has been an awesome seller. Would buy from again in the future! A++++++
Turbo, Wastegate, BOV, Intercooler will be paid once first shipment is received.
Jason has been an awesome seller. Would buy from again in the future! A++++++
