WTS bunch of stock LS1 fbody parts
02-23-2014, 06:35 PM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Nov 2013
Location: passed out in a ditch
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
WTS bunch of stock LS1 fbody parts Category: Accessories
Price: $123456789
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): MD
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine
from a stock 98 Z28 with 120K. I am unsure if the springs/shocks are the originals, but they are the DeCarbon. It rode like a boat when I took them out, so I think they are the originals from 98. The fronts are complete with the mounts and everything. They LCA and panhard rods are in ok shape with light surface rust, bushings are pretty dry.
panhard rod- $20
rear LCAs- $20
Springs/shocks -$50
Also have the following emission systems. The A.I.R. motor in my car has a short and I thought I would need it to pass inspection (which I didnt need so I deleted AIR), so I bought a used A.I.R. motor from here, with all hoses. This was for the years that had a diverter valve, and a bracket that mounts to the rear of the head. Also includes a complete set of hoses that came of my car, including the metal pipes that come off the manifolds, with new check valves. I never put the motor in my car, so I am unsure if it works, but I bought it from a user on here who had good feedback so I have no reason to think its bad.
AIR system as described above $50
EGR system. Complete with valve and all pipes, worked when it was on the car. Only reason I took it off is because I was taking the AIR system out and figured I might as well do that at the same time. $35
Shift boot for M6, leather (maybe??), new. Bought it off ebay but I ended up using the one in my car with a new metal bracket. It looked like you would need to cut a slit if you were going to use the metal bracket. $10
Tan Fbody T-top shades. In very good condition. $50
Magnaflow Catback. Don't know how many miles on it, but its in decent shape. Biggest problem is the bracket that hooked up to the hanger over the rear axle snapped off, so you need to have a new one welded on. Might also need some clamps. $125
Hypertec Power Programer for 1998 LS1 Fbody. Think it might work on the Vetts as well but not sure. Comes with manual. Great condition. $75
I can take pics if needed, just shoot me a PM. Cash only if local, if shipped then USPS MO only. All prices do not include shipping, buyer pays actual cost.
Last edited by slaterdump; 03-23-2014 at 09:37 PM.
