Superman09

iTrader: (65)

Category: Engine - Power Adders
Price: $2995
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): MI
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

Up for sale is a Brand New Huron Speed V2 T6 Turbo Kit.
Had a customer back out so we have this unit sitting on the shelf ready to go! No wait time, order and ship!

Includes:
-Our new V2 Stainless Steel, Vbanded, extra thick .120 wall Manifolds that retain the OEM Alternator location
-2.25” extra thick .120 wall Stainless Crossover with divided T6 flange, True divided crossover set-up with twin 44mm WG flanges (one per bank) and bungs for primary O2 sensors. Added joint to allow for easier installation. All piping stays ABOVE the oem sway bar as well!
-5" - 4" Stainless 2-piece downpipe routed out the front bumper with a wideband O2 bung and plug. 2-piece connection with a v-band to allow easy installation of the exiting, fully polished tip.
-Turbo Support bracket that also doubles as the turbo oil drain for easy hook up.
-4" Thick Core intercooler with direct bolt on brackets
-Fully Polished 3” and 3.5" Cold side piping from Turbo to Intercooler and Intercooler to Throttle Body with 50mm BOV flange.
-All necessary couplers and clamps, only straight couplers are used in this kit to avoid any worries of blowing out elbow couplers! Entire hotside consists of all v-band connections
-Stainless Steel Hex Head Bolt/Hardware Kit included!
-HSP T6 Oil Feed and Drain Line Kit included!
-T6 Turbo Blanket included!
-Shipping Included



*Kit requires: Stood up radiator (dual pass recommended) with coolant hoses and fans to clear piping/turbo. A/C removal. Relocation of battery and coolant overflow tank to fit the charge pipe to throttle body *If retaining ABS, requires minor lowering of ABS block. Requires BW S400 T6 turbo, wastegates, and BOV as well to complete (all of which we can supply at final checkout!) Some turbos may require a small enlargement of it's mounting holes ( typically only 2 if any as manufacturers spacing tends to vary we have noticed). Lower Radiator Hose outlet may require modification depending on your specific placement of the radiatior.



*Kit built around a BW S400 T6 Turbocharger with a 3" Hose style slip fit compressor discharge. If running a standard S400 with the 3.5" V-band discharge, you will have to remove the v-band flange or grind it down for clearance to the frame rail and use a slip fit style connection with a silicone coupler. Other turbochargers can fit this kit, however it was designed around the S400 T6 therefore a downpipe flange swap may be required and possibly some other mods depending on actual dimensions of the other charger used.



*Kit RETAINS: OEM Alternator location, OEM Front Sway bar, OEM Power steering, *ABS, and OEM or any aftermarket K-member!





Purchase your T6 kit now with no wait time, and get the FREE Oil Line kit, and FREE Turbo Blanket!!!


$2995 + $50 shipping to the lower 48 states.
*Sale Pending*



Picture below shows all components you will receive PLUS the Oil Line kit and the Turbo Blanket!






Photos shown below are intended so you can see the kit installed. Turbo, WG's, BOV shown not included but can be added.

Superman09

iTrader: (65)

Bump, Still available!

Poppacapp

I am currently in the search for a good roller chassis to start either a 5.3, or 6.0 project in. Will definitely be looking you guys up after the motor build for a kit. Very nice looking setup!

Superman09

iTrader: (65)

Thanks! We look forward to getting you set-up!

Superman09

iTrader: (65)

Still Here!!

Superman09

iTrader: (65)

Still here!!

383camaroz28

iTrader: (22)

Worth every penny guys !

Superman09

iTrader: (65)

Glad you love your V2 T6 kit, thanks!!

Still available!

Sprayed 99

iTrader: (14)

What's the max hp the intercooler is rated for?

Kmspeedie

iTrader: (1)

that one is around 1k but they have an upgraded bell core thicker IC thatll handle 1200+

Superman09

iTrader: (65)

It will start becoming less efficient over the 1k rwhp mark, however we do have the Bell option for those looking for something much more efficient above the 1k rwhp mark as mentioned

Superman09

iTrader: (65)

Morning Bump, still here!

Superman09

iTrader: (65)

*Sale Pending*