Garage clean out! some stock some aftermarket
#1
On The Tree
Thread Starter
iTrader: (8)
Join Date: Sep 2007
Location: Sioux City, IA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Garage clean out! some stock some aftermarket
Category: Accessories
Price: $0
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): IA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
2- 98-02 fbody v8 bare k-members= $100
1- LS1 short block needs rehone= $600
1- LS1 bare block= $300
3- 5.3 water pump w/tensioner= $40
1- F-body fan assembly= $75
1- F-body radiator assembly=$50
1- F-body A/C condenser= $25
2- F-body A/C compressor= $75
1- F-body pair clams may need new inserts as the bolts
are stuck in the mount itself. = $30
2- F-body TCS ABS modules= $100
1- set F-body A/C lines= $50
1- F-body air pump= $50
1- F-body washer reservoir= $20
1- Kooks 3" y-pipe 2.75" outlet= $225
4- NEW 3.1108G energy suspension trans mount NIB= $20
1- NEW 3.1108G energy suspension trans mount missing isolator plate/hardware= $10
1- NEW Magnaflow 59959 3" cat= $80
1- '01 F-body manual harness with vat delete PCM= $650
1- NEW Auto UMI TQ arm relocation bracket (missing hardware)= $200
1- Stainless Works 1.75" primary headers & 2.5" Y 99-07 truck= $600
1- Set 4 DDM raptor ballasts & new vvme 4300k 9006 and 880= $60
1- 2WD 4L80 w/converter from 2001 GMC sierra with 90k miles. Fluid is red and was told it went in and out of gear fine.= $700
1- Set of Eibach Pro kit 3870.140= $200
1- Black Tunnel brace for headers/Y with driveshaft loop= $80
1- Black Spohn torque arm crossmember for headers & Y w/driveshaft loop #405XM= $150
20- LS oil pressure sensor adapter 1/8 npt port- $45shipped
1- Blox 4" velocity stack with K&N filter- $40
All items are plus shipping and PayPal fee. Pictures and additional information available at your request. Located Sioux City Iowa 51106 thanks for looking.
Last edited by }BlueFire{; 06-18-2015 at 02:55 AM.
Trending Topics
#9
On The Tree
Thread Starter
iTrader: (8)
Join Date: Sep 2007
Location: Sioux City, IA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
I'll get the measurements for sure tomorrow. Unfortunately I've had to rely on the owner of the garage where the stuff is to get things for me. However tomorrow I will be there to get pictures of everything. He was sick Monday and today he lost the key. He assured me he will have a key tomorrow when I go down. Hopefully I should have pictures for everything tomorrow.
#10
On The Tree
Thread Starter
iTrader: (8)
Join Date: Sep 2007
Location: Sioux City, IA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
The radiator core is about 1" thick 25 3/8 wide 18.5 tall the overall is
30 wide 19 tall 2.5 thick at the end caps
30 wide 19 tall 2.5 thick at the end caps
Last edited by }BlueFire{; 04-29-2015 at 07:46 PM.
#16
On The Tree
Thread Starter
iTrader: (8)
Join Date: Sep 2007
Location: Sioux City, IA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
I'll post pictures tonight of the coils. I believe I have a picture of the tensioner but I'm not sure. If not unfortunately I am away from the garage until Tuesday. In which I'll grab a picture then.