Lots of LSx parts and blowers
#1
Lots of LSx parts and blowers
Category: Accessories
Price: $1
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): NC
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Edelbrok Pro-Flo with rails and 42# injectors. Intake and rails are new, mock-up only. Injectors used. Intake for cathedral port heads. Includes all the vacuum fittings that you'd have to track down on your own, intake to cyl head gaskets and several fuel rail fittings
Intake EDL-7139
Rails EDL-3629
Sold
BNIB Aeromotive 340 pump. Dirty from bouncing around my shop. Build date jan 2014
AEI-11141
$140 shipped
LS3 intake complete minus injectors. Intake, rails, silencer, MAP sensor, bolts, intake to cyl head gaskets etc
SOLD
LS1 intake with TB, rail and injectors. Corvette unit, so cable bracket will have to be added or use DBW. Comes with MAP sensor, TB sensors, gaskets, billet rails, truck injectors. Buyers choice of TB, DBC or DBW
SOLD
Whatever TB doesnt get sold with ^ DBW still available
$50
Magnacharger supercharger lower intake tub for rect port heads. These are impossible to find on their own and great for budget SC builds
Not for sale anymore
Cobra M112 (gray) and Shelby M122 (black) superchargers. Work fine, bearings, couplers, rotors and BPVs in great shape. Go great with the intake tub above
$375 shipped M112
$425 shipped M122
$575 shipped M122 with 2.6 pulley and quick change hub
TKO600, recently freshened up ready for use. 26sp input, 31sp output, ford unit, can be used behind LSx engines with the right BH, or throw it in a mustang. Free spec clutch if you want it
SOLD
Pile-o-truck-parts
Truck manifolds
$30/set ERG style + ship
$40/set non-EGR + ship
Intakes $25 + ship
Rails + ship
$25 returnless
$35 return style
Truck balancers $15 + ship
243 heads. Very dirty
$350 picked up, $425 shipped One set SOLD one set left
VERY firm on price
Vortech V1 head unit, new never had oil through it, mock-up only. Standard clockwise rotation, strait discharge
$650 shipped
5.3 in Fbody dress
120k miles, stock inside, no known issues
Fbody intake/injectors/TB/manifolds/oil pan. Billet rails
FEAD uses truck parts but has a custom bracket for low and tight arrangement for low hoodline cars. Fbodys, 240s etc
GEN III block
24x crank
Alt isnt pictured but is included
No harness/PCM
SOLD
Last edited by Pocket; 12-11-2015 at 04:32 PM. Reason: Add imgs
Trending Topics
#10
Never ran a LS3, just 5.3's and various 6.0 combos. I did a sidemount M122 on the mostly stock LQ4/4L80E. Pretty stout
A M122 on a LS3 wouldnt be gutless, but compared to TVS 1900 and 2300 kits, it will fall VERY short. For a DIY build on a tight budget, it will do nicely. People forget just how much a 500HP car is
A-trim I think. Strait vanes. Its seriously old, hence why its half price of most other centri head units. Was planning a twin build but never could find a match that wasnt $2k
A M122 on a LS3 wouldnt be gutless, but compared to TVS 1900 and 2300 kits, it will fall VERY short. For a DIY build on a tight budget, it will do nicely. People forget just how much a 500HP car is
What trim is your vortech v1 supercharger?
#16
Pm me best price minus the injectors please.
Edelbrok Pro-Flo with rails and 42# injectors. Intake and rails are new, mock-up only.
Injectors used. Intake for cathedral port heads. Includes all the vacuum fittings that you'd have to track down on your own, intake to cyl head gaskets and several fuel rail fittings
Intake EDL-7139
Rails EDL-3629
$600 shipped
Edelbrok Pro-Flo with rails and 42# injectors. Intake and rails are new, mock-up only.
Injectors used. Intake for cathedral port heads. Includes all the vacuum fittings that you'd have to track down on your own, intake to cyl head gaskets and several fuel rail fittings
Intake EDL-7139
Rails EDL-3629
$600 shipped