WTB: High Compression Pistons 4.0XX/stk stroke
01-14-2013, 03:55 PM
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2010
Location: Northern Indiana
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
WTB: High Compression Pistons 4.0XX/stk stroke I am looking to build a higher compression motor and need pistons and rods. I would like to be around +12cc or so with a 4.0xx bore on a stock stroke, LS3 head/valves.
I will bore it for whatever piston size, so anything around 4.030 to 4.070 is fine.
So, let me know what you have! Not interested in flat tops, running LS2 Pistons now.
Thanks in Advance.
I will bore it for whatever piston size, so anything around 4.030 to 4.070 is fine.
So, let me know what you have! Not interested in flat tops, running LS2 Pistons now.
Thanks in Advance.
01-16-2013, 08:36 PM
#3
On The Tree
iTrader: (2)
Join Date: Jul 2012
Location: LJC
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
+11 cc custom Wiseco solid dome 4.030 bore made to accept ls3 heads works with stock length after market rod or 6.125 rod stock 3.622 stroke .927 wrist pin 1900 miles 750 obo shipped. new they are 1200. With my ls3 heads milled .040. I'm at 13.7:1. Lmk gotta give me a day or two to disassemble them if you do want them. Could sell you some lightened skat rods and ls3 heads with out springs too hell i could sell you my whole 370cid engine made 485 Rwhp mustang dyno with the wrong cam pm me if interested
Last edited by 370cidZ06; 01-16-2013 at 10:11 PM.
