kingtal0n

iTrader: (1)

Hello car enthusiasts,

I am doing a LS swap for 240sx 1995 S14.

1. I need the F-body or vette accessories and brackets, complete set with compressor, balancer, alternator, PS pump, tensioners etc...

I will be buying a brand new water pump so I dont really need that part (Save on shipping)

2. I also need a RETURN STYLE LS1 Fuel rail if you have one

Streetlegal?

iTrader: (25)

pm sent

N/A86

iTrader: (10)

I have a new gm ls6 valley cover.
(716)428-1674

kingtal0n

iTrader: (1)

Doing The truck engine 5.3 Swap into a 95 240sx So I need vette or F-body accessories, the whole thing with brackets and so forth please to the top

-PS pump and bracket
-Alt & bracket
-water pump pulley (pump I will replace)
-balancer/crank pulley
-a/c compressor & bracket
-tensioners and idler pulleys
-belt if you have it
-what am i forgetting?

TomM

iTrader: (56)

I have most of that from a 2004 GTO....same as f-body with exception of PS pump. PM if interested.


T,

SUTTERERMAN85

iTrader: (42)

I have a complete accessory f body setup on a motor I pulled out of my 99 Camaro. 25% underdrive crank pulley. The plug on the compressor was broke but the pins were still there and working. PM me if you are interested. Im putting an LSA blower on that motor now and have gone to c5 vette spacing.

kingtal0n

iTrader: (1)

Is this a good valley cover to go with an LS1 or LS6 intake manifold, to delete the terrible PCV problems,

http://www.ebay.com/itm/LS1-LS6-Engi...NRElMw&vxp=mtr

Is that the same as an LS6 valley cover?

conexion914

iTrader: (5)

I have the stock Power Steering pump and bracket that I removed from my car.

Located in Central Florida.

Let me know if you're interested.

kingtal0n

iTrader: (1)

updated my list on the first post now that I know more or less what I really need.

LXinMS

iTrader: (58)

I've got an ac bracket. PM me an offer.

corey331

I have a complete front accessory set up off of a 01 Camaro. Has every bracket, PS Pump, Alternator, A/C Compressor, Balancer...everything. I also have a SFI balancer for f-body spacing if you would be interested. I am in Ohio, but my parents spend their winters in Ft. Myers FL. They will be be in Ohio in a week or so for my girls birthday, then will be heading back to FL. Shoot me a PM if you're interested.

ROCNDAV

iTrader: (100)

I have a 2002 Fbody alternator, brackets for alt,
ps pump, pulley and bracket (no reservoir).
Tensioner
AC compressor (and complete system) and brackets

kingtal0n

iTrader: (1)

Thanks everyone, I was able to get a complete F-body setup, HOWEVER:

I am STILL looking to buy spares. If you have any spare brackets, or accessories, for GTO, Fbody, Corvette, even just a balancer for a vetter or something, I would be interested. Any tensioners, idlers, even bolts and belts are fair game. I would like to gather a few different versions so that I can mix and match my engine until I get everything to fit correctly.

I am also looking for brand new gaskets for the engine, oil pan, intake manifold, exhaust MLS, any gaskets you have new I could buy thanks

kingtal0n

iTrader: (1)

Now I am looking for power steering pump & bracket with reservoir for F-body (or similar)

and

alternator bracket (with alternator if possible)

kingtal0n

iTrader: (1)

To the top still looking thanks

some parts found, still need the PS pump/bracket and alt bracket.

And if you have a FIXED displacement A/C compressor with F-body offset, and bracket, that would be cool as well