Cylinder Heads
#1
TECH Enthusiast
Thread Starter
iTrader: (42)
Join Date: Mar 2006
Location: Gettysburg, PA
Posts: 725
Likes: 0
Received 0 Likes
on
0 Posts
Cylinder Heads
Im looking for a pair of cheap cylinder heads...I want an 853 or 241 castings but I dont care as long as they are cheap and for an LS1.
I have access to a flow bench through school and I just want to try to hand port a set of heads...they will probably never make it onto the car so like I said the cast doesn't matter that much.
I have access to a flow bench through school and I just want to try to hand port a set of heads...they will probably never make it onto the car so like I said the cast doesn't matter that much.
#5
TECH Apprentice
iTrader: (31)
Join Date: Feb 2005
Location: Long Island, NY
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LS1IMPULSE
I have access to a flow bench through school and I just want to try to hand port a set of heads...they will probably never make it onto the car so like I said the cast doesn't matter that much.
i have a set of 853 & 241 castings - one of the 241's have been ported somewhat already so you may not have interest in them...
but let me know if anything
Trending Topics
#9
Teching In
iTrader: (4)
Join Date: Mar 2007
Location: Pensacola, FL
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Ported and Polished 241 cast heads
They are milled to a 60cc chamber. have about 2000 miles on them, and one of the valves is after market. Also have brand new comp 918 springs on them (never compressed) I personally had the heads pressure tested and bolted them on my motor then decided to go more all out. (only reason for selling)
asking 750+shipping
ARP Head Bolts
still in the box. Hex Head for LS1.
asking 130+shipping
Comp 987 Double Springs
never used, Brand new off TEA heads
I would be willing to work with price a little, especially if you want no springs or stock springs with low miles or add bolts.... whatever.
feel free to call my cell 850.516.3746 anytime. but i am in class tonight 5-6ish
Thanks, Josh
They are milled to a 60cc chamber. have about 2000 miles on them, and one of the valves is after market. Also have brand new comp 918 springs on them (never compressed) I personally had the heads pressure tested and bolted them on my motor then decided to go more all out. (only reason for selling)
asking 750+shipping
ARP Head Bolts
still in the box. Hex Head for LS1.
asking 130+shipping
Comp 987 Double Springs
never used, Brand new off TEA heads
I would be willing to work with price a little, especially if you want no springs or stock springs with low miles or add bolts.... whatever.
feel free to call my cell 850.516.3746 anytime. but i am in class tonight 5-6ish
Thanks, Josh