PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

which would be better?

Thread Tools
 
Search this Thread
 
Old 07-07-2010, 01:27 AM
  #1  
Teching In
Thread Starter
iTrader: (1)
 
6LiterHawk's Avatar
 
Join Date: May 2010
Location: TEXAS
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
Default which would be better?

so i am finishing up on my lq9 swap into my 2000 firehawk, just wondering if i should use the 28lb. injectors that came with my ls6 intake manifold, or if i should use the ones that came on the lq9, i wont be able to get a tune for a little while after i get it done. was just wondering if the stock tune would work with the 28lb. injectors or not.
Thanks
Old 07-07-2010, 05:29 AM
  #2  
9 Second Club
iTrader: (2)
 
BLK02WS6's Avatar
 
Join Date: Jul 2002
Location: on the dyno tuning in MD
Posts: 2,583
Likes: 0
Received 1 Like on 1 Post

Default

I believe the LQ9 injectors won't hook up - the connectors are different. The 28# injectors will be fine till you get it tuned... go easy on it till you get it tuned though.
Old 07-07-2010, 02:53 PM
  #3  
Teching In
Thread Starter
iTrader: (1)
 
6LiterHawk's Avatar
 
Join Date: May 2010
Location: TEXAS
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
Default

alright thanks, would i be better off using the stock ls1 injectors till i get it tuned?
Old 07-07-2010, 05:40 PM
  #4  
9 Second Club
iTrader: (2)
 
BLK02WS6's Avatar
 
Join Date: Jul 2002
Location: on the dyno tuning in MD
Posts: 2,583
Likes: 0
Received 1 Like on 1 Post

Default

Your 2000 came with 28# injectors as well, so it doesn't matter... I looked at a stock 2000 tune to double check, and it is set for 28#ers.




All times are GMT -5. The time now is 10:04 PM.