Heelp!!!
#1
10 Second Club
Thread Starter
Join Date: Mar 2003
Location: pierre part louisiana
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Heelp!!!
im switching from 27lb ls1 injectors to a 41lb? ls3 injectors in a ls1 car... Im struggling finding the injector offset table. i already have the flow rate vs pressure table.
is there any other tables that i need??? HEELP PLEASE!
is there any other tables that i need??? HEELP PLEASE!
#3
10 Second Club
Thread Starter
Join Date: Mar 2003
Location: pierre part louisiana
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
yea that's part of the problem, I downloaded a stock 2010 camaro 6.2 tune to compare to my ls1's tune and basically all the injector tables are written differently soo I'm unable to copy/paste I'm assuming this is do to the computer change to e38 pcm's, basically I need a ls1 tuned for ls3 injectors that I can copy/paste or someone to tell me exactly what to change...
#6
Launching!
iTrader: (19)
Join Date: Jul 2010
Location: Groton, CT.
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Try this out(highlight copy and paste the yellow highlighted cells)... Somebody can double check me if they wish because I just threw it together quick.
www.brewspeed.com/ls3 injector.xlsx
**I made the assumption that you are running the factory fuel system @ 60 psi. If you aren't I would need to redo the spreadsheet.
www.brewspeed.com/ls3 injector.xlsx
**I made the assumption that you are running the factory fuel system @ 60 psi. If you aren't I would need to redo the spreadsheet.
#7
Thanks man that's exactly what we were looking for, we have a corvette filter with internal reguator. The actual pressure measured at the rail is aprox. 58-60psi if that makes any difference to anything? And also with this table and flow rate vs kpa is that the only changes I need to make?
Trending Topics
#8
Launching!
iTrader: (19)
Join Date: Jul 2010
Location: Groton, CT.
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Thanks man that's exactly what we were looking for, we have a corvette filter with internal reguator. The actual pressure measured at the rail is aprox. 58-60psi if that makes any difference to anything? And also with this table and flow rate vs kpa is that the only changes I need to make?