LS3 418 Stroker 2004 GTO
#1
Teching In
Thread Starter
LS3 418 Stroker 2004 GTO
Well after throwing a rod back in October on a Lil' LS1 after 101,000 miles I decided to go bigger. So I purchased a new LS3 Block w/ Forged Callies Crank/rods and coated Diamond pistons and stroked it to a 418cid. Cam was a Pat G grind 251/258 660/598 111+4 LSA. Due to funds I had to reuse my stock topend but did get a set of 243 heads. Upgraded to 42# greentop injectors, new Hinson motor mounts and a new 1-pc driveshaft from The DSS and of course all the required goodies. Well the numbers are 475hp/468tq. I know I should crest the 500 mark once I get better heads, intake and a throttle body but going to enjoy what I have until Fall. So I attached a pic of the dyno since my scanner is down. Click my link below to see a quick vid I took Saturday. Tell me what you think? Thanks
[IMG][/IMG]
http://youtu.be/CaOIJH2JdSg
[IMG][/IMG]
http://youtu.be/CaOIJH2JdSg
Last edited by FFFASTGTO; 12-22-2011 at 05:28 PM. Reason: computer error
#5
Teching In
Thread Starter
Thanks for the compliments guys. Yeah the big cam definately gets some looks at the gas station (which I frequent a lot) getting 11mpg and I love stop lights. With the car shaking and exhaust it's fun to see people looking around for that noise. lol. haha
Trending Topics
#12
12 Second Club
iTrader: (3)
Join Date: Apr 2004
Location: Grand Rapids, Michigan
Posts: 1,512
Likes: 0
Received 2 Likes
on
2 Posts
That is a crazy large cam but you have the cubes to support it. Beautiful torque curve. It sounds awesome but I'd be afraid to drive it around town. That must get the attention of every cop in your zip code. I see you have one of the original hand made intakes. Those were a lot of work and I like seeing they live on.
#14
Teching In
Thread Starter
Thanks for bringing this back up lol. It's been a blast to drive this last 8 months and I have put almost 10k miles on it. Drives like it has a big cam but my stall helps out greatly. Need to replace axles next and upgrade the rear end then onto the heads/intake Thanks again guys. Also get about 12-13 mpg. DAYUM.
Haven't been pulled over since the motor but I do have to peddle around the cops. also your intake is F'n awesome. My tuner said its the Best intake he has seen on any of the GTO's he has personally tuned. I love the hand made look, It means I am "special". lol. Thanks again man.
That is a crazy large cam but you have the cubes to support it. Beautiful torque curve. It sounds awesome but I'd be afraid to drive it around town. That must get the attention of every cop in your zip code. I see you have one of the original hand made intakes. Those were a lot of work and I like seeing they live on.
#15
Teching In
Thread Starter
I havent taken it to the track...ever..lol. But will do once I upgrade some other parts. It's also a daily driver and I would hate to tear it up at the track. Yeah the heads and intake are really holding it back but that means I have plenty of room to grow. thanks.