2001 & 5th Gen Camaro - Many Parts
#1
Teching In
Thread Starter
Join Date: Apr 2008
Location: Utah
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
2001 & 5th Gen Camaro - Many Parts
Category: Exterior - Body Parts
Price: $100
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro
Location (State): UT
Item Condition: Used
Engine: LS1/LS6, Small Block
LS Engine?: Fits LS Engine
Date – January 2015
Some of these parts are about to be given to a junk yard. See reduced prices & make me an offer before they are gone!!!
► 2001 Camaro Z28 Parts For Sale
Factory Rear Hatch, maroon in color with non-defroster glass $250.00
61”x59”x11”, part is +/- 75#
Interior Hatch Trim pieces, black $60.00/set of 3 pieces
Factory Rear Spoiler for hatch, maroon in color $75.00
57”x24”x5”, part is +/- 13.5#
Aftermarket pin-on FG hood, grey gelcoat finish, near perfect $75.00
60”x54”x5”, part is +/- 18#
Factory Spare tire and wheel, doughnut, and jack - $40.00 for both
Factory intermediate exhaust pipe - $40.00
35”x33”x6”, part is +/- 12#
Factory panhard rod and torque arm - $30.00 for both
Factory Z28 front sway bar, springs, lower control arms - $30.00 full front set of factory parts
Factory Z28 rear sway bar, springs, lower control arms - $30.00 full rear set of factory parts
Factory front driving lights - $10.00/pair
Factory shifter – $20.00 (I had installed a short throw after-market shifter)
SLP MAF - $75.00
All factory parts came off of a 2001 Camaro Z28 that I bought new, but I no longer have the car. I replaced the original factory steel hood with this pin-on hood when the car was only a few months old. I later went to a hinged FB hood which was sold on the car, so I am selling the aftermarket pin on FG hood. I installed larger SLP sway bars, along with SLP springs, lower control arms, and bilstein shocks within the first year of ownership. I replaced the factory rear hatch with a light weight aftermarket FG piece with a lexan window about 2006, and I am now selling the factory unit. The hatch and spoiler are maroon to match the original car, and I believe still factory paint. The hatch and spoiler are in excellent condition. All the parts are in excellent condition. The spare tire/wheel is near perfect.
► 2013 Camaro SS Parts For Sale
2011 Factory Aluminum Hood, gloss black, near perfect! Make your Camaro look like a 1LE - $350.00
2013 Factory air intake box & MAF sensor & intake tube to engine, complete with air filter – $150.00
● Make an Offer on any or all of these parts!!
The 2001 parts were on my 2001 Z28 Camaro, and I understand that of them will fit the 1998 to 2002 Camaro & Firebird. The parts are just filling up the garage, and my wife said that I need to clean them out! They are in Pleasant Grove, a little south of SLC, Utah. I can post more photos if it would help, just let me know what you need. Buyer pays shipping.
Last edited by 01sleeperZ; 02-13-2015 at 08:07 PM. Reason: update what is left and lower prices
#3
Teching In
Thread Starter
Join Date: Apr 2008
Location: Utah
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I do not know, but I can get a weight and try to find out. I think it was about 25 or 30 lbs. I also noticed that the photo I posted on the K frame was the new one that I installed when the old one cracked. I will try to post a new photo, and see if I can photo the crack. BMR went to a larger tube size in the later one that is in the photo.
#5
Teching In
Thread Starter
Join Date: Apr 2008
Location: Utah
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
The factory shocks were deCarbon from France, orange in color. They look excellent, and did not stay on the car very long. I edited the parts list to clarify.
Trending Topics
#8
Teching In
Thread Starter
Join Date: Apr 2008
Location: Utah
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
The deCarbon shocks & struts are sold, and the BMR k-member and BMR lower control arms are sold, and the SLP muffler & tail pipes are sold - I have edited the ad to remove them. Please - any offers on the rest of these parts? I need them out of my garage!