"big shot" wet nitrous kit for efi with purge
#1
TECH Apprentice
Thread Starter
iTrader: (3)
Join Date: Dec 2011
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
"big shot" wet nitrous kit for efi with purge
Category: Accessories
Price: $275
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird, Front wheel drive vehicles
Location (State): FL
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, LT1/LT4, Small Block, Big Block
LS Engine?: Fits LS Engine
the nitrous kit comes with big zex fuel and nitrous solenoids (look at the inlet fitting size compared to the purge solenoid, they are 1/4 npt compared to 1/8 npt... i was told these will handle up to a 400 shot they should handle up to a 300 no problem), 250hp rated big zex purge solenoid, newer ny-trex wet nozzle rated up to a 300hp shot, ill throw in one pair of jets you pick hp rating between 75-250, nitrous mounting collar that mounts the nozzle into the intake bellow (im throwing in my bellow it fits 98-02 fbody camaro/firebird, i had to cut it to fit my setup but it will still fit stock setups), -3an solenoid to nozzle lines, -4an braided fuel feed line 3 feet long (fits most lsx fuel rail pressure ports), -4an line that runs to purge, 14 ft -4an nitrous feed line, i also have a -4an solenoid to nozzle line that has a -3 fitting on one side, and the -4an solenoid fitting... with this and an upgraded -6an feed line this setup will spray up to a 250-300 shot!!! it will spray up to a 200 with the 3an nozzle line/4an feed line. the wires are pretty short coming out of the solenoids but i have soldered/heat shrunk extensions on them. NO BOTTLE what you see is what you get. ive had this kit on my car for about a year and a half now it never lets me down, the only reason im getting rid of it is because i picked up a plate kit on trade. im asking $275 and thats with shipping and paypal fee's included.
purge:
Nitrous noid:
nitrous feed:
-4an nozzle line and solenoid fitting:
Last edited by boostit5.3; 11-29-2014 at 10:14 AM.