2002 WS6 T/A Convertible SOM M6 32of32
#1
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Mar 2005
Location: Southwestern Ontario Canada
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
2002 WS6 T/A Convertible SOM M6 32of32
Year: 2002
Make: Pontiac
Model: Trans Am
Price: $18750
Mileage: 46700
Private or Dealer Listing: Private Listing
Location (State): Can-ON
Color: Orange
Transmission: Manual
Drivetrain: Rear Wheel Drive
Beautiful '02 WS6 vert, M6, SOM. 32 of this combo in the final year, and this is the final one.
Babied over the past 15 years. I purchased from the original owner in 2005 with 8000 miles.
New tires at 45k miles – BF Goodrich G-Force T/A KDW NT 275/45-17 all around
New Clutch/Master & Slave Cylinder @ 45k miles –LuK 04-173 clutch
Regular oil changes - Mobile 1 5W-30 / K&N Filter – every 1500 miles over past few years
New window motors both sides
Paint in perfect condition – looks new
Monsoon recently swapped with Android HU. Original Monsoon (working) included.
The car has been garage kept and babied since new.
Bolt on mods:
- LS1 Motorsports lid
- K+N air filter
- SLP smooth bellows
- Short throw shifter
- Pacesetter long tube headers
- Custom Y with Magnaflow low flow cats
- Magnaflow muffler
- Duel tip chrome exhaust
Note: all original parts removed for bolt ons are in perfect condition and are included.
Last edited by 32of32; 05-24-2016 at 02:50 PM. Reason: Price Reduction
#5
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Mar 2005
Location: Southwestern Ontario Canada
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
It's not much lower than stock although these pics make it look that way. I did the heater hose mod on the rear springs 10 years ago - stock springs all around. I still have the original donuts along with all the other bolt on mods I did at the time.
#6
Teching In
iTrader: (1)
Join Date: Jun 2009
Location: St. Paul, MN
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Do you have any of the original paper work as far as window sticker? I assume it also has the matching front plate cover and bag for the three piece top covers? Are the door panels showing any sign of splitting/separation?
#7
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Mar 2005
Location: Southwestern Ontario Canada
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
I have a bunch of documentation I plan on throwing in for the buyer that I have kept protected in a binder for 109 years (some pics attached). I do have the original window sticker - as well as a letter from ASC documenting the WS6 work that was completed with a special note that it was the last SOM vert they did. I also have a pretty cool email from GM on the last day of production at St. Therese. I also have a bunch of different sales brochures and from 2002 all in mint condition.
I have the front plate cover and 3 pc. bag. The door skins have the well tension cracks on both sides (I haven's seen a vert with >10000 miles without them). Look at Pic #4 at the top.
Yesterday I replaced the passenger headlight motor (not just the gear) because it has stripped both halves of the original gear.
Open to offers - but am not interested in lowballers.
I have the front plate cover and 3 pc. bag. The door skins have the well tension cracks on both sides (I haven's seen a vert with >10000 miles without them). Look at Pic #4 at the top.
Yesterday I replaced the passenger headlight motor (not just the gear) because it has stripped both halves of the original gear.
Open to offers - but am not interested in lowballers.
Last edited by 32of32; 05-22-2016 at 09:08 AM.
Trending Topics
#11
Ran across this thread researching my vehicle. It's interesting the info that ASC gave you as my car was built in 06/2002, and has a much later vin. I don't think ASC gives info anymore...