FS 279780 JE LS7 F.S.R. Dish Pistons 4.130 bore -22cc
02-20-2017, 12:34 PM
#1
On The Tree
Thread Starter
iTrader: (4)
Join Date: Dec 2010
Location: Simi Valley, California
Posts: 122
Received 0 Likes
on
0 Posts
FS 279780 JE LS7 F.S.R. Dish Pistons 4.130 bore -22cc Category: Accessories
Price: $500
Location (State): CA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Pistons are brand new in original box, only opened box to look inside. Changed engine set up so pistons are now for sale. Piston pins and wire locks included. Piston rings are not included.
$500.00 SHIPPED!!! PRICED OVER $175.00 BELOW WD COST!!!
Paypal ready,
Text at 805-797-0959
Alex
FSR (Forged Side Relief) slipper forging design accommodates factory stroke and rod length while easily clearing the reluctor wheel. These Heavy-Duty LS7 pistons are designed for extreme levels of Nitrous/Boost (Pin upgrade recommended above 700 HP). CNC-machined ring grooves accept 1.5, 1.5, 3mm rings. (CR calculated with .042 gasket thickness and 0.00" deck clearance). STOCK ROD MUST BE HONED TO ACCEPT .927" DIA PIN. MILLING OF ROD BALANCE PAD MAY BE NEEDED DUE TO VARIATION FROM FACTORY.
Includes:
Pin #927-2250-15-51C (111g)
Wire locks #927-073-MW
Part # 279780
CID: 428
Bore: 4.130
Stroke: 4.00
Rod Length. 6.077
Block Height: 9.240
Comp. Height: 1.163
Head Cubic Centimeters 64cc 66cc 72cc
Compression Ratio 10.1 10.0 9.5
Dome Vol. -22.0cc
Gram Wt. 436
Oversize Recommended Ring Set J60008-4130-0
Last edited by trbolssln0522; 07-10-2017 at 06:52 PM.
