1998 Camaro Partout - Kooks Headers / Moser 12 bolt / Magnaflow / Cammed LS1
#1
Teching In
Thread Starter
iTrader: (16)
Join Date: Mar 2012
Location: Raleigh, NC
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
1998 Camaro Partout - Kooks Headers / Moser 12 bolt / Magnaflow / Cammed LS1
Category: Drivetrain
Price: $1
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): NC
Item Condition: Used
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
1-3/4" Kooks stainless headers - $500
Complete Magnaflow Exhaust - SOLD
Moser 12 bolt - 4.11 posi - Spohn sway bar mounts - Moser girdle - complete with brakes - $2,000
Strut Brace - $60
SLP lid with blackwing filter- SOLD
MAF - $30
BMR tubular torque arm - SOLD
Bolt in driveshaft loop - $40
LS1 E-fans - $90
2002 LS1 longblock with .650 dual springs, comp cam, and pushrods. Either rod knock or lifter issue that goes away once warm - still runs but will need some attention - $1000
Complete LS6 intake - SOLD
F-body accessories (less AC) - SOLD
Not looking to part out any body parts and will be selling the complete roller with complete grey cloth interior in great shape. Car is a hardtop with crank up windows and manual locks. Roller will come with adjustable tubular lower control arms, tubular panhard bar, SLP subframe connectors, shift light, ABS delete, Wilwood line lock setup, C5 wagon wheels, Koni shocks on the front and Comp adjustable shocks on the rear, also has a cowl hood with ghosts flames, and will have a stock rear back under it - $2,000
Any questions feel free to ask.
336.339.6867
Thanks-
Rick
Last edited by JRMClassics; 09-08-2015 at 07:26 PM.
#4
Teching In
Thread Starter
iTrader: (16)
Join Date: Mar 2012
Location: Raleigh, NC
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
^^ There's a pic of the exhaust and the torque arm in first post. What else would you like pics of?
^ I believe the headers are 1-3/4" but can measure them tomorrow and confirm.
^ I believe the headers are 1-3/4" but can measure them tomorrow and confirm.
Trending Topics
#16
Teching In
Thread Starter
iTrader: (16)
Join Date: Mar 2012
Location: Raleigh, NC
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Initial buyer I was holding the rear for is now MIA, so it's still available. Kooks headers are 1-3/4" primaries with 3" collectors.
Last edited by JRMClassics; 08-15-2015 at 03:12 PM.