F/S: 430+ rwhp H/C setup with less than 300 miles on it....
F/S: 430+ rwhp H/C setup with less than 300 miles on it.... F/S: 430+ rwhp H/C setup with less than 300 miles on it....
APE fully ported heads, 5.7 castings, have been milled <.010, and have 2.02 and 1.575 Manley Stainless Steel Valves, Comp Cams 978 Valve Springs and Titanium Retainers, Bronze Valve Guides, Teflon Valve Seals, and Comp Cams Hardened Spring Seats. Cam is a FMS F13 (230"/232" .595"/.585" 113lsa).
Flow numbers on the heads:
.100" 73 / 54 cfm
.200" 150 / 111 cfm
.300" 207 / 155 cfm
.400" 252 / 195 cfm
.500" 285 / 221 cfm
.600" 292 / 231 cfm
.700" 301 / 237 cfm
Heads and cam have less than 300 miles on them, and dynoed 410/380 with full exhaust (no cutout), 12 bolt w/ 4.30s, full belts, heavy 18x10.5 wheels and 295/35/18 tires, etc. This setup would easily be good for 430+ with a 10 bolt and a cutout. I'm asking $1500 OBO for heads and cam together. May seperate if I can sell both at the same time, but don't wanna pull the cam if I can't sell the heads, or vice versa. By the time you sell your stock heads, you'll have ~$1200 in a stout H/C setup..... Thanks, PM or post here if interested, Shawn
APE fully ported heads, 5.7 castings, have been milled <.010, and have 2.02 and 1.575 Manley Stainless Steel Valves, Comp Cams 978 Valve Springs and Titanium Retainers, Bronze Valve Guides, Teflon Valve Seals, and Comp Cams Hardened Spring Seats. Cam is a FMS F13 (230"/232" .595"/.585" 113lsa).
Flow numbers on the heads:
.100" 73 / 54 cfm
.200" 150 / 111 cfm
.300" 207 / 155 cfm
.400" 252 / 195 cfm
.500" 285 / 221 cfm
.600" 292 / 231 cfm
.700" 301 / 237 cfm
Heads and cam have less than 300 miles on them, and dynoed 410/380 with full exhaust (no cutout), 12 bolt w/ 4.30s, full belts, heavy 18x10.5 wheels and 295/35/18 tires, etc. This setup would easily be good for 430+ with a 10 bolt and a cutout. I'm asking $1500 OBO for heads and cam together. May seperate if I can sell both at the same time, but don't wanna pull the cam if I can't sell the heads, or vice versa. By the time you sell your stock heads, you'll have ~$1200 in a stout H/C setup..... Thanks, PM or post here if interested, Shawn
Last edited by SPANKY LS1; Dec 18, 2004 at 02:32 PM.
