Tony Shepherd

iTrader: (4)

I might be using a Victor E series EFI intake (part # 29785) on my 396 LT1. I have to have a forward facing t-body. What kind of 90 degree elbow are you guys using to come off the intake and face forward for the t-body?

Thanks

Tony

Dave95Formula

Race Proven Motors sells the PTE 100 Degree 4150 Flange / 90mm for $159 and the 90 Degree version for $179.

Race Proven Motors

Turbo Performance Systems sells the PTE 4150 Flange / 90 Degree / 90mm for $165.

Turbo Performance Systems

Those are the best prices I have found on my own searching so far.

If you are looking for a 90mm throttle body I will make you a great deal on a brand new Wilson Billet 90mm throtte body.

Dave

PNYKILR

Also, Wilsons Manifolds sells them. I'm running a Acufab 4B TB. I thought about the 90 degree elbow when first doing this, but changed my mine about ten times and just went with what I'm running now.

Neal

Dave95Formula

The Wilson elbow is a PTE.

Dave

Z8'S

iTrader: (6)

I am using a Wilson Elbow with an Accufab 105mm tb.

Dave95Formula

Removing the water crossover / thermostat housing is just too slick. Who did that and the EFI conversion?

Dave

Z8'S

iTrader: (6)

Bret Bauer. Bauer race engines in New York
Strokerace on cz28.com

Tony Shepherd

iTrader: (4)

Thanks for the info! I have a AS&M monoblade t-body though that I would like to use. Do they make an elbow for this t-body?

Jon A

Nobody does at the moment, but it's being worked on.

Dave95Formula

I have seen a couple, but I don't remember where. They were essentially one-offs custom fabricated out of sheetmetal.

Dave.

Tony Shepherd

iTrader: (4)

Thanks for the info guys!!

Z8's.....that is a nice setup!!

Mikey 97Z M6

iTrader: (37)

Love that Honda Mini Trail in the background of that pic. I had one of those when I was 9.

Mike