Im Parting Out Some Parts On My 2000 Ws6.

1)moser 9"-best Components-35 Spline Axles,detroit Locker,4.10 Gears, 1350 Yolk ,1/2 Extended Wheel Studs,torque Arm Mount Welded On,rear Sway Bar Brackets Already Welded On,sprayed Gloss Black.ready To Bolt In. Also Have Strange Steel Driveshaft
(shotened To Fit On 6 Speed Cars-wont Fit A4 Cars) 2000.00 For Everything(bought In April FRoM Billingsley Racing-never Seen Track)will Need 10 Bolt In Exchange
2)STOCM MAF WITH PLASTIC MAF ENDS-45.00

located About 30 Min South Of Chicago In Orland Park.pm Me For Any Questions

 

what kind of BMR TA is it? is it floor mount or chassis mount?

 

How many miles on the 9"?

 

bmr torque arm mounts to tailshaft of trans.


rearend probably only has about 2500 miles on it

 

Do you still have the 9inch??

 

If the LCAs are the ones with the adjustment in the center of the control arm, i will take them for 125 shipped to 30080 (smyrna, ga)

 

Yes 9 " Still For Sale

Lca Are Sold

 

TTT for a good seller guys.

 

to the top

 

I Know Somebody Needs A Bulletproof Rearend

 

TTT For you. I have this rear and it is sick! If your serious about going fast this is the setup. I also drive mine everywhere. Thats is a smoking deal!

 

Ttt For The New Year

 

is the 9" a 3 or 4 channel?

 

is the panhard chromemoly or mild steel? how long was it on the car?

 

9' are for a 3 OR 4 channel. But you will not be able to maintain the ABS on a 3 channel.

 

but u can order them without ABS/TCS or u can order them for it. which in case it would be a 4 channel. so i guess i should ask is it a 4 channel rear ?

 

Would you be willing to sell the driveshaft seperately?
If so, what is it worth?
Thanks

 

Will this Rear End fit a 93 Z28?? I do want to keep my Rear ABS.

 

The Rear Has No Abs Or Traction

 

I'm interested in the rear if you still have it. What's the best price you can do shipped to 21228?