FS: Stock parts (suspension/engine/tranny), tires, and more
Thread Starter
TECH Fanatic
iTrader: (16)
Joined: Jun 2004
Posts: 1,120
Likes: 0
From: Chicago - Southside
Here's what I have for sale, all parts have 40K easy miles on them:
Stock pushrods: Awesome condition. $20 shipped
Stock valvesprings: Awesome condition as well. $20 shipped
Stock cam: Awesome shape. $20 shipped
Stock torque converter: Great condition. $65 shipped
Stock front spring/strut assemblys (pair): Excellent condition. $50 shipped
Stock rear control arms (pair): Great shape. $25 shipped
Stock panhard rod: Great shape. $25 shipped
Stock torque arm: Awesome shape. $25 shipped
Stock 2.73 gears: Great shape, for a 2-series carrier. $40 shipped
Stock 2-series carrier (2 available): For a Blazer/S10, not recommended for an f-body. Awesome shape, low mileage. $45 shipped each
Stock Monsoon 4" speakers: Beautiful shape, work perfectly. $40 shipped
Stock Monsoon/Delco amp: Awesome shape, works perfectly. $30 shipped
Stock AC condensor: Awesome shape. Fully functional.
Stock AC compressor: Awesome shape. Functions perfectly.
Stock Camaro A4 shift ****: Awesome shape. Leather wrapped. $15 shipped
Stock Trans Am A4 shift ****: Great shape. Leather wrapped. $15 shipped
Goodyear Eagle F1 GS tires (2): A pair of 275/40R17's. Approximately 65% of tread left. Great shape. Do not know exact mileage. $175 shipped
3" Moroso SpiralFlow bullet-style muffler: Only used for test fitting, and to see how it would sound, maybe 10 actual 'miles' on it. Sounds incredible, it purrs... $35 shipped
Flowmaster 80-series crossflow muffler: For an F-body, clean cuts on inlets and outlets, cleaned up a bit with a Dremel, would weld right up. Awesome shape. $40 shipped
Custom FloPro catback: Very interesting catback I picked up. 3" I-pipe (all intact), with manual cutout welded in. 3" inlet/2.5" dual outlet muffler (says 'FloPro'), and dual 2.5" turndown tailpipes. Awesome shape, freshly painted mufflers and tailpipe. Complete, clean catback. $85 shipped
NEW ITEM FOR SALE: SLP cold air intake. This is the sheetmetal air intake duct, complete with the metal screws it came with. Perfect shape, has only been used for 1500 miles. Clean, complete. $85 shipped
I'm open to negotiation on all these parts and would be willing to work and setup package deals. I'd just like to clean out the garage and bit and move some of these, so if you are interested in any of these or looking for anything, let me know. Thank you very much.
Adam
Stock pushrods: Awesome condition. $20 shipped
Stock valvesprings: Awesome condition as well. $20 shipped
Stock cam: Awesome shape. $20 shipped
Stock torque converter: Great condition. $65 shipped
Stock front spring/strut assemblys (pair): Excellent condition. $50 shipped
Stock rear control arms (pair): Great shape. $25 shipped
Stock panhard rod: Great shape. $25 shipped
Stock torque arm: Awesome shape. $25 shipped
Stock 2.73 gears: Great shape, for a 2-series carrier. $40 shipped
Stock 2-series carrier (2 available): For a Blazer/S10, not recommended for an f-body. Awesome shape, low mileage. $45 shipped each
Stock Monsoon 4" speakers: Beautiful shape, work perfectly. $40 shipped
Stock Monsoon/Delco amp: Awesome shape, works perfectly. $30 shipped
Stock AC condensor: Awesome shape. Fully functional.
Stock AC compressor: Awesome shape. Functions perfectly.
Stock Camaro A4 shift ****: Awesome shape. Leather wrapped. $15 shipped
Stock Trans Am A4 shift ****: Great shape. Leather wrapped. $15 shipped
Goodyear Eagle F1 GS tires (2): A pair of 275/40R17's. Approximately 65% of tread left. Great shape. Do not know exact mileage. $175 shipped
3" Moroso SpiralFlow bullet-style muffler: Only used for test fitting, and to see how it would sound, maybe 10 actual 'miles' on it. Sounds incredible, it purrs... $35 shipped
Flowmaster 80-series crossflow muffler: For an F-body, clean cuts on inlets and outlets, cleaned up a bit with a Dremel, would weld right up. Awesome shape. $40 shipped
Custom FloPro catback: Very interesting catback I picked up. 3" I-pipe (all intact), with manual cutout welded in. 3" inlet/2.5" dual outlet muffler (says 'FloPro'), and dual 2.5" turndown tailpipes. Awesome shape, freshly painted mufflers and tailpipe. Complete, clean catback. $85 shipped
NEW ITEM FOR SALE: SLP cold air intake. This is the sheetmetal air intake duct, complete with the metal screws it came with. Perfect shape, has only been used for 1500 miles. Clean, complete. $85 shipped
I'm open to negotiation on all these parts and would be willing to work and setup package deals. I'd just like to clean out the garage and bit and move some of these, so if you are interested in any of these or looking for anything, let me know. Thank you very much.
Adam
Last edited by 8banger; Jun 8, 2006 at 12:42 PM.
Thread Starter
TECH Fanatic
iTrader: (16)
Joined: Jun 2004
Posts: 1,120
Likes: 0
From: Chicago - Southside
Originally Posted by tbick
im interested in the trans am auto shifter ****. its in good shape with no rips or scratches?
Originally Posted by DarkFormula
Do you have the Monsoon rear seat speakers available?
Originally Posted by travisnd
can you send me a pic of the ac condensor to travisnd@aol.com
Trending Topics
Can I get a pic of the Bullet Muffler? Might want to retrofit my Loudmouth.......
ducati996spr@yahoo.com
Thanks!
ducati996spr@yahoo.com
Thanks!
Thread Starter
TECH Fanatic
iTrader: (16)
Joined: Jun 2004
Posts: 1,120
Likes: 0
From: Chicago - Southside
Bump. I have two more items for sale:
-Stock 1999 LS1 thermostat: Perfect working order. $25 shipped
-Oil catch can: Red plastic, has both PCV fittings and brass valve at bottom. Great condition. Works perfectly. $50 shipped.
-Stock 1999 LS1 thermostat: Perfect working order. $25 shipped
-Oil catch can: Red plastic, has both PCV fittings and brass valve at bottom. Great condition. Works perfectly. $50 shipped.


.