Brand New 9" Rear and Torque arm
Thread Starter
Staging Lane
iTrader: (11)
Joined: Feb 2005
Posts: 65
Likes: 0
From: Philadelphia, PA
Brand New 9" Rear and Torque arm I have a brand new 9" rear that i was going to put into my car, but do to unforseen finacial circumstances i need to sell everything i was going to put in.
The center section has a forged 1350 yoke, Daytona Pinion support, Detroit locker, 3.7 gears. Was told it should support 1000+HP.
Moser 9" housing w/torque arm support, Forged 31 apline axels.
I also will include all the rest of the Misc. stuff i bought for the install, Nuts + Bolts, ujoint conversion(so you can use your stock drive shaft). I believe all you need to buy is gear fluid and i think some gasket maker.
you will need to press on your backing plated for your brakes
I can not ship this, so this is for local pickup only. I am located in Philadelphia.
$2000
Brand new Adj. Torqure Arm from UMI. Powder coated Red, Tunnel Brace Mount. No DS LOOP and is the flattunnel brace not the bent $300
If you want to pay by paypal you must add 3% to total price including shipping.
The center section has a forged 1350 yoke, Daytona Pinion support, Detroit locker, 3.7 gears. Was told it should support 1000+HP.
Moser 9" housing w/torque arm support, Forged 31 apline axels.
I also will include all the rest of the Misc. stuff i bought for the install, Nuts + Bolts, ujoint conversion(so you can use your stock drive shaft). I believe all you need to buy is gear fluid and i think some gasket maker.
you will need to press on your backing plated for your brakes
I can not ship this, so this is for local pickup only. I am located in Philadelphia.
$2000
Brand new Adj. Torqure Arm from UMI. Powder coated Red, Tunnel Brace Mount. No DS LOOP and is the flattunnel brace not the bent $300
If you want to pay by paypal you must add 3% to total price including shipping.
Last edited by 4thGenTA; Feb 22, 2006 at 07:49 PM.
Thread Starter
Staging Lane
iTrader: (11)
Joined: Feb 2005
Posts: 65
Likes: 0
From: Philadelphia, PA
Originally Posted by AllThrottle4U
Is it set up for traction control(reluctor rings on axles)? Is it a moser center or strange?
Trending Topics
Thread Starter
Staging Lane
iTrader: (11)
Joined: Feb 2005
Posts: 65
Likes: 0
From: Philadelphia, PA
Originally Posted by Violat0rX
will this fit a LT1 camaro with ABS and TC?
Thread Starter
Staging Lane
iTrader: (11)
Joined: Feb 2005
Posts: 65
Likes: 0
From: Philadelphia, PA
Yes i will the sell the housing/axles seperate from the center section. If someone just wants the center section i will ship that at buyers expense.
Prices seperate would be
Housing/axles $900
Ceter section $1300
Prices seperate would be
Housing/axles $900
Ceter section $1300
Teching In
Joined: Feb 2006
Posts: 39
Likes: 1
From: cincinnati
Hi do you still have everything . if so please send me pics and part numbers I am very intrested cdsanfordii@yahoo.com