LS1 Stroker FWD - Tuners Beware!
#1
TECH Apprentice
Thread Starter
Join Date: Jan 2004
Location: Frisco TX (Dallas Area)
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
LS1 Stroker FWD - Tuners Beware!
Well, we started this about 2 years ago and finally fired it off this week. Sig for details. Work left to do, but soon, very soon. LMK what you think.
#5
TECH Apprentice
Thread Starter
Join Date: Jan 2004
Location: Frisco TX (Dallas Area)
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
Fully built GM Racing (Ecotech) 4T65E-HD by DynoTech. 650HP half shafts. Anti-torque steer lower a-arm bars with Heim joints. That's the best we could do for now. Gotta get some rubber under it for the street (slicks aready in the garage). Hoping for 11's N/A. Turbo by summer. We'll see wha hoppens!
Trending Topics
#10
TECH Apprentice
Thread Starter
Join Date: Jan 2004
Location: Frisco TX (Dallas Area)
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mikespeed95
meh, cool car for something that will run mid 13's at 120
#15
I have the build page started for Tom's install.
http://www.fastfieros.com/projects/tomkls1
The latest pic
Loyde
http://www.fastfieros.com/projects/tomkls1
The latest pic
Loyde
#16
TECH Enthusiast
iTrader: (6)
That must have taken alot of work to get it right at home in a GP....prop to you
Do you think it would have been much harder to make it a rear wheel drive car....I am thinking getting the tranny for the FWD setup must have been alot of work.
What tranny are you using anyway?
I own a grandprix and love everything about it except the fact that they dont have a manual trans and are FWD
Do you think it would have been much harder to make it a rear wheel drive car....I am thinking getting the tranny for the FWD setup must have been alot of work.
What tranny are you using anyway?
I own a grandprix and love everything about it except the fact that they dont have a manual trans and are FWD
#20
TECH Apprentice
Thread Starter
Join Date: Jan 2004
Location: Frisco TX (Dallas Area)
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BlackBirdWs6Zzz
That is amazing! Really really cool! If ricers can handle the FWD then you can do it. I'm interested to see what that runs. Rember you can still do donuts in reverse.
Seriously, there are 3800 GP's in the low 10's. This should do high 11's with the same traction. Time will tell.
I owe it all to Loyde's (FastFieros) talent and expertise. It seems that guy can do almost anything! He deserves the props. He's earned them!