FS: Parting out heavily modded 96 Camaro

 
Thread Tools
 
Search this Thread
 
Old Apr 26, 2006 | 12:11 PM
  #1  
96-speed's Avatar
Thread Starter
TECH Enthusiast
iTrader: (19)
 
Joined: Jan 2002
Posts: 687
Likes: 0
From: Houston, TX
Default FS: Parting out heavily modded 96 Camaro

Updated 5/29/06 10:30am

Parts are from a 96 Camaro.

I won't ship the seats.


Suspension and Drivetrain:

Exhaust
4" exhaust = 200

http://memimage.cardomain.net/member...6_172_full.jpg


Single plane intake (converted to EFI with wilson elbow) 750

http://community.webshots.com/photo/...7911918hYMTZi#

Racetronix Fuel pump, harness, and sending unit: 150

93-96 to 97+ Dash conversion
97 (ebony Black) Dash Conversion 750
Includes console (6spd), and monsoon radio CD player.

Install guide I made:

http://www.cardomain.com/ride/345879/3

http://memimage.cardomain.net/member...79_23_full.jpg

http://memimage.cardomain.net/member...79_24_full.jpg

TA leather seats (Rears included) 350

Pass

http://memimage.cardomain.net/member...6_157_full.jpg

Driver's
http://memimage.cardomain.net/member...6_158_full.jpg

http://memimage.cardomain.net/member...6_159_full.jpg

Alternator - 30
Accessory bracket - 20

I'm in Houston, TX.

Ryan

Last edited by 96-speed; May 29, 2006 at 10:35 AM.
Old Apr 26, 2006 | 12:50 PM
  #2  
ChevyChad's Avatar
8 sec potential, 12 sec slip
iTrader: (50)
 
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
Default

What is the condition of the 12-bolt? How many miles? Do you have the driveshaft too? Does it have the 3-channel ABS by chance? Very interested. PM me some details.

Thanks,
-Chad
Old Apr 26, 2006 | 01:00 PM
  #3  
blind527's Avatar
TECH Fanatic
iTrader: (8)
 
Joined: Feb 2005
Posts: 1,332
Likes: 0
Default

Do those Prostars come with spacers for the skinnies? What kind of tires, and what condition are they in? What is the rim/tire size?
Old Apr 26, 2006 | 01:18 PM
  #4  
Tx02ssm's Avatar
Teching In
 
Joined: Aug 2005
Posts: 39
Likes: 0
From: Austin, Tx
Default

Will the QA1/springs work on my 02 camaro? do you know the part numbers so I can check? Thanks - stevet
Old Apr 26, 2006 | 01:21 PM
  #5  
SSwanner's Avatar
10 Second Club
iTrader: (128)
 
Joined: Jun 2005
Posts: 778
Likes: 0
From: Meridian, MS
Default

PM sent about 10 min ago about...QA1's, upper, & lower controll arms.
Old Apr 26, 2006 | 01:24 PM
  #6  
1fstTA's Avatar
TECH Enthusiast
iTrader: (25)
 
Joined: Nov 2001
Posts: 648
Likes: 0
From: shreveport, Louisiana
Default

well **** Id take the upper and lowers a arms and the qa 1s let me know I can paypal the money right now.
Old Apr 26, 2006 | 01:43 PM
  #7  
SSwanner's Avatar
10 Second Club
iTrader: (128)
 
Joined: Jun 2005
Posts: 778
Likes: 0
From: Meridian, MS
Default

PM sent on the rolling chasis also, does it have a title or any possibility of being a street LEGAL (not DD, street legal race car)?
Old Apr 26, 2006 | 03:56 PM
  #8  
rollinna65's Avatar
TECH Enthusiast
iTrader: (18)
 
Joined: Nov 2004
Posts: 603
Likes: 1
From: Salado, TX
Default

PM sent on shifter.
Old Apr 26, 2006 | 04:51 PM
  #9  
sheikss's Avatar
TECH Enthusiast
iTrader: (11)
 
Joined: Nov 2004
Posts: 688
Likes: 0
From: columbus GA
Default

How much for 12 bolt and how much for the spoiler?
Old Apr 26, 2006 | 04:52 PM
  #10  
sheikss's Avatar
TECH Enthusiast
iTrader: (11)
 
Joined: Nov 2004
Posts: 688
Likes: 0
From: columbus GA
Default

My bad I see the prices. Would you go any lower on the spoiler?
Old Apr 26, 2006 | 05:06 PM
  #11  
StangEaterSS's Avatar
10 Second Club
20 Year Member
iTrader: (41)
 
Joined: Mar 2003
Posts: 752
Likes: 5
From: Rockford, IL
Default

PM sent.
Old Apr 26, 2006 | 05:10 PM
  #12  
97SprChrgd383's Avatar
Launching!
iTrader: (5)
 
Joined: Jan 2005
Posts: 221
Likes: 0
From: Mustang, OK
Default

I'm intersted on the lt1 edit. What comes with it? Cables, etc...
Old Apr 26, 2006 | 06:46 PM
  #13  
1_badt/a's Avatar
Teching In
iTrader: (8)
 
Joined: Apr 2006
Posts: 28
Likes: 0
From: laredo
Default

pm sent
Old Apr 26, 2006 | 07:14 PM
  #14  
RedRyder518's Avatar
TECH Apprentice
iTrader: (2)
 
Joined: Mar 2006
Posts: 370
Likes: 0
From: Katy, Texas
Default

I am interested in the Pro-Stars if the other deal falls through. I am also wondering about the tires, like condition, ect... Thanks!
Old Apr 26, 2006 | 08:52 PM
  #15  
96-speed's Avatar
Thread Starter
TECH Enthusiast
iTrader: (19)
 
Joined: Jan 2002
Posts: 687
Likes: 0
From: Houston, TX
Default

Ok guys, I've replied to all the PMs thus far. Let me try to answer some of the questions.

ChevyChad: 12bolt is in good condition. It whines from 60-50 deccel. It was setup for 4channel ABS, but I did not have it functional. I'm not sure what it would take to get it working again (ABS). I have a shortened stock, sluminum driveshaft that I'd let go for 50 bucks (1350 Ujoint).

The prostars are spoken for as of right now. Most popular item, too. Go figure. No spacers or lugnuts come with them. I am the first owner, there is no rash. There is some scratching on the BACK of the wheel from testing fitting them on calipers that needed to be ground down.

The shocks are spoken for. Mileage on the shocks is probably 40k, and they are price accordingly, IMO. (Front AND rear included).

Car is definitely capable of being street legal. Only thing that makes it unstreetable for me is the fact that I pulled the HVAC out. Chassis would NOT include any interior. It would include windows, all panels/fenders (never been wrecked), LS1 front brakes, power steering and steering column, and that is it. Pretty plain, and priced accordingly.

LT1 edit is spoken for.

Ryan
Old Apr 26, 2006 | 09:09 PM
  #16  
KrisXpc's Avatar
TECH Enthusiast
iTrader: (13)
 
Joined: Sep 2005
Posts: 557
Likes: 3
From: Houston, Tx
Default

pm sent
Old Apr 26, 2006 | 09:23 PM
  #17  
95wht6spd's Avatar
Teching In
 
Joined: Apr 2006
Posts: 18
Likes: 0
From: Greensboro, NC
Default

I may be interested in the heads and Prog Mags. How many miles on both, are the RR's 1.6 and for 7/16 studs? Do you have the LE2 cam also, I heard you can't get the cam without getting the heads from LE, is this true?
Old Apr 26, 2006 | 09:32 PM
  #18  
Havok2's Avatar
11 Second Club
iTrader: (118)
 
Joined: Jan 2004
Posts: 2,994
Likes: 0
From: RGV texas
Default

Tubular panhard 50

color, and adj?
Old Apr 26, 2006 | 09:35 PM
  #19  
Red97Z's Avatar
TECH Enthusiast
iTrader: (22)
 
Joined: Nov 2005
Posts: 661
Likes: 0
From: Trenton, NJ
Default

can u send me pics and info about the canton oil pan? blackpixi7@hotmail.com thanks!
Old Apr 26, 2006 | 10:21 PM
  #20  
joshua32's Avatar
TECH Apprentice
iTrader: (20)
 
Joined: Aug 2004
Posts: 392
Likes: 0
From: Brighton, CO
Default

pm sent

Joshua



All times are GMT -5. The time now is 07:43 PM.