i tried to search for my old thread, but i kept getting a "request time-out" error message, so if this is a problem please let me know mod's/admin's, thanks

all this stuff came off my motor with 6000 miles on it, all sensors and such are new GM parts, i have all recipts to prove it. id prefer to sell the heads and intake together since they are port-matched. parts are located in northern NJ zipcode 07960, machine work on the cylinder heads was done by Dark Horse in Madison NJ.
pictures at the bottom:

'97 lt1 aluminum heads: fully ported/polished, decked, valves back-cut for better flow(stock valves), LT4 springs/retainers - $1500 obo

lt1 intake: port-matched to heads, powder coated red (the PC is starting to peel, the guy didnt do too great of a job) has EGR/AIR block-off plates, new map sensor - $150

TPIS 52mm throttle body: comes with new TPS and IAC - $250

30# SVO injectors - $100

aeromotive adjustable fuel pressure regulator - $75

1.6 GMperformance parts roller rockers - $75

LT4 composite valve covers (have some minor scuff marks on the back) - $100

meizer electric water pump w/housing: glass beaded housing, installed a plug in the lower coolant hose(didnt need it) - $150

'97 lt1 front timing cover: has the larger opening for updated optispark, installed a brass plug to eliminate waterpump drive - $50

'97 optispark (only 6000 miles on it) - $200

trickflow aluminum intake elbow w/ new mass air sensor and IAT, cone filter - $300

lt1 starter - $100

Stef's fabrication specialties aluminum oilpan for 1-piece rear main SBC, has built in trap-door, screen - $300

T56 sixspeed (has a noisy input shaft bearing *i think* does not affect opertation, drives perfectly normal) w/ centerforce clutch and GM flywheel - $1500obo

i also have all the accesories/brackets with a/c delete pulley, alternator, brand new PS pump( still in the GM box), harmonic balancer. if interested please let me know. pics available!










any questions please PM, if you want to talk on the phone ill be more than happy to give my # out in PM's.

p.s. i know someone was interested in the valve covers and intake elbow for sure, please pm me again guys!

 

 

i also have a PCM(new GM unit, also has 6k on it) tuned for all these mods and have the EGR/AIR/VATS/skipshift, etc.. deleted - $250

 

what size stud are the roller rocker for? do you still have the aluminum elbow, if so how much

 

do the valve covers come with all the hardware, and the rockers are the self aligning lt4 cam kit 1.6 RR right?

 

i dont know the stud size, theyre the stock studs if that helps?

covers come with all hardware, and the rockers are from the hotcam kit.

 

valve covers and rockers are mine pm sent paypal ready

some good deals wish i had more cash!!

 

port pics of the intake please

 

see the last 2 pictures in my first post in this thread.

 

pm and e-mail sent

 

I would like to buy the Injectors and FP Regulator. I PM'd An Emailed you.

Ron

 

will you sell the elbow by itsself

 

pm sent

 

hey hit me up with your paypal ready to send payment for the valve covers and rockers

 

valve covers and rockers - sold!
waterpump - sold!
regulator - sold!
intake elbow - sold!

thanks guys!

 

TTT, ill sell the heads and intake for $1300 shipped.

 

will the oil pan fit an fbody?

 

honestly i dont know, it doesnt have a provision for the oil level sensor, but aside from that i dont see why it wouldnt?

 

PM sent, what kind of HP did you get out of this setup or do you know? timeslips or anything?

 

I need an AC delete pulley ... if it is for sale PLEASE pm me with total price!
Thanks!