the cam is a Lunati cam barely even 300 miles on it, the specs are 242/242 .595/.595 112LSA....$300

317 heads are very mildly ported and polished, just cleaned up the runners and port a little they have a 5 angle valve job and comp 918's complete heads...$500.....Sold

Comp 7.4 hardened pushrods....$75....Sold

30lb injectors off an 8.1L...$100


all of these have a little less then 300 miles on them

 

how much for the heads minus the springs. i cant run those

 

knock off $100 so i will do them for $400 shipped

 

To The Top

 

did you run this cam and the 918's springs together? how'd it work for you?

 

yep i ran them together and i had no problems was shifting out at 6,800rpm on a stock 6.0 still making good power

 

what was the ptv like with that cam?

 

"ptv" not sure i understand what you mean, by the way i am mean05 just on a different name

 

sorry, something has come up and I'm not going to be able to buy the heads.

Bump for a good deal.

 

bump for a good deal

 

pm sent

 

piston to valve clearance (forgt the last part, lol). Any problems running it on stock unmilled heads?

 

oh no i had no problem at all with running this cam, these heads i had on here are stock unmilled heads, and this cam was badass on nitrous......


Heads are Sold