242/ 242 .595/.595 cam and 317 heads and other stuff
#1
Teching In
Thread Starter
Join Date: Aug 2006
Location: Dallas, TX
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
242/ 242 .595/.595 cam and 317 heads and other stuff
the cam is a Lunati cam barely even 300 miles on it, the specs are 242/242 .595/.595 112LSA....$300
317 heads are very mildly ported and polished, just cleaned up the runners and port a little they have a 5 angle valve job and comp 918's complete heads...$500.....Sold
Comp 7.4 hardened pushrods....$75....Sold
30lb injectors off an 8.1L...$100
all of these have a little less then 300 miles on them
317 heads are very mildly ported and polished, just cleaned up the runners and port a little they have a 5 angle valve job and comp 918's complete heads...$500.....Sold
Comp 7.4 hardened pushrods....$75....Sold
30lb injectors off an 8.1L...$100
all of these have a little less then 300 miles on them
Last edited by mean05; 05-24-2007 at 08:49 AM.
Trending Topics
#13
Teching In
Thread Starter
Join Date: Aug 2006
Location: Dallas, TX
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
oh no i had no problem at all with running this cam, these heads i had on here are stock unmilled heads, and this cam was badass on nitrous......
Heads are Sold
Heads are Sold