QA1, BMR, Moser, prostars, oem
07-23-2007, 08:49 PM
#1
Import Patrol
Thread Starter
iTrader: (41)
Join Date: Jul 2005
Location: Brookfield, IL
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
QA1, BMR, Moser, prostars, oem All parts are from a 2002 WS6
I have a new 9inch for sale for 4th gen. It has a nodular case.
Moser housing
4.11 Motive gears
Tru-Trac diff
1350 Spicer Forged Yoke
Moser F-body Cast Torque Arm Mount - STRONG!
31 spline axles
new axle bearings
New 4 Channel ABS / TCS Exciter Rings Installed
fill plug
drain plug
Shortened 2.5inch on each side
I bought new over the winter. But I am going with a different mid section which will require different spline axles. And figured it would be hard to just sell the mid section and axles without the housing.
$2,300 firm
Stock radiator $75 shipped
Front and rear brake calipers. Grinded to fit prostars. $65 shipped
I have a new 9inch for sale for 4th gen. It has a nodular case.
Moser housing
4.11 Motive gears
Tru-Trac diff
1350 Spicer Forged Yoke
Moser F-body Cast Torque Arm Mount - STRONG!
31 spline axles
new axle bearings
New 4 Channel ABS / TCS Exciter Rings Installed
fill plug
drain plug
Shortened 2.5inch on each side
I bought new over the winter. But I am going with a different mid section which will require different spline axles. And figured it would be hard to just sell the mid section and axles without the housing.
$2,300 firm
Stock radiator $75 shipped
Front and rear brake calipers. Grinded to fit prostars. $65 shipped
Last edited by CrawlinWS6; 07-30-2007 at 03:44 PM.
07-23-2007, 09:33 PM
#3
07-23-2007, 09:44 PM
#6
TECH Enthusiast
iTrader: (25)
Join Date: Nov 2001
Location: shreveport, Louisiana
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
im interested in the front a arms but retail on bmr site for both are 629.95 what is your rock bottom on the package and what is rock bottom on the lower ones only.
07-23-2007, 09:47 PM
#7
Import Patrol
Thread Starter
iTrader: (41)
Join Date: Jul 2005
Location: Brookfield, IL
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
I'll do them both $600 shipped. But these are brand new. just opened the box they were in. $400 shipped is the best I'll do. Since I'll be loosing $50 plus the shipping costs.
Trending Topics
07-23-2007, 10:18 PM
#18
Import Patrol
Thread Starter
iTrader: (41)
Join Date: Jul 2005
Location: Brookfield, IL
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
Ls1's front are different. I grinded them because I was not going to run spacers. But did anyway. My buddy ran them on his 97 lt1 and only needed a spacer (1/2 inch)
07-23-2007, 10:21 PM
#20
11 Second Club
iTrader: (15)
Join Date: Jun 2006
Location: San Antonio, Tx
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CrawlinWS6
I'll even throw in the lug nuts too.