new 9inch for sale
Thread Starter
Import Patrol
iTrader: (41)
Joined: Jul 2005
Posts: 2,330
Likes: 0
From: Brookfield, IL
new 9inch for sale I have a new 9inch for sale for 4th gen. It has a nodular case.
Moser housing
4.11 Motive gears
Tru-Trac diff
1350 Spicer Forged Yoke
Moser F-body Cast Torque Arm Mount - STRONG!
31 spline axles
new axle bearings
New 4 Channel ABS / TCS Exciter Rings Installed
fill plug
drain plug
Shortened 2.5inch on each side
I bought new over the winter. But I am going with a different mid section which will require different spline axles. And figured it would be hard to just sell the mid section and axles without the housing.
$2,300 firm
Moser housing
4.11 Motive gears
Tru-Trac diff
1350 Spicer Forged Yoke
Moser F-body Cast Torque Arm Mount - STRONG!
31 spline axles
new axle bearings
New 4 Channel ABS / TCS Exciter Rings Installed
fill plug
drain plug
Shortened 2.5inch on each side
I bought new over the winter. But I am going with a different mid section which will require different spline axles. And figured it would be hard to just sell the mid section and axles without the housing.
$2,300 firm
Staging Lane
Joined: Sep 2005
Posts: 67
Likes: 0
Originally Posted by chief455
I think that width is a direct fit for 3rd gen cars - might want to explore that selling forum...nice deal 
Trending Topics
Thread Starter
Import Patrol
iTrader: (41)
Joined: Jul 2005
Posts: 2,330
Likes: 0
From: Brookfield, IL
I'll have to measure it. I'll do it tonight.
it is not sold yet.
And it will fit in a 4th gen with no problem. All the shock and spring mounts are where they are needed. You would just have to run a different back spacing for your wheels.
it is not sold yet.
And it will fit in a 4th gen with no problem. All the shock and spring mounts are where they are needed. You would just have to run a different back spacing for your wheels.
Mid-section would you considered selling your rear-end in parts, i am interested in the mid section, as i don't think the shortened axles would work for my application , was this for a tubbed out car. thanx
Thread Starter
Import Patrol
iTrader: (41)
Joined: Jul 2005
Posts: 2,330
Likes: 0
From: Brookfield, IL
I am not interested in selling the mid section alone. i would sell the midsection with the axles though. Otherwise I don't see myself being able to sell the axles.
This was not for a tubbed car. It would work on 4th gens without a problem, as lond as they had the correct back spacing on the wheels
This was not for a tubbed car. It would work on 4th gens without a problem, as lond as they had the correct back spacing on the wheels
Just some input to help you sell - i had a 2.5" narrowed on each side 9" in my t/a. It allowed normal backspace wheels for drag, and for street i ran 17x11 grand sport wheels with a 2" spacer, they looked perfect. I have pics if it would help anyone visualize the axle in the car.