I have a forged 347 longblock for sale. It consists of the following:
LS6 Block
Polished GM Crank
Probe Ultralight 6.125" Forged I beam Rods-Doweled-ARP 7/16 Rod bolts
Ross 3.905 Forged Pistons 4cc Reliefs
Diamond Rings Gapped @ .029 and .032
King Alecular Rod Bearings
Clevite 3/4 Groove Main Bearings
Clevite Cam Bearings
The shortblock has less than 500 miles on it.
SHORTBLOCK SOLD

ALL ITEMS OBO
Cometic .040 Head Gaskets --- SOLD
RollMaster Double Roller Chain-Heat Treated CS1160--- $90 PLUS SHIPPING
Comp Cams 244/248 617/.622 109+6---$200 PLUS SHIPPING
Comp 850-16 Lifters (less than 500 miles)---$145 PLUS SHIPPING
Comp HiTec Chromemoly Push rods 7.425 ---SOLD

Patriot 59cc Stage 2 LS6 Heads w/New Manley Valves 2.02/1.57
The chambers were welded by Patriot to 59cc so you retain stock deck height minus the .004 for clean-up.
Heads were just reworked Guides, Valves, and Seals have less than 45 miles on them. They were decked .004 to clean up. Competition valve job
Patriot Gold springs good to .650 lift. All springs checked out good.
---SOLD


Heads

 

intrest in the short block

 

Pm sent on long block.

 

PM Replied.

 

I'd be interested in the heads

 

How much for the heads?

 

I will price the heads out as soon as the shortblock is sold.

 

All PM's replied to.

 

this is very tempting. if you still have the longblock for sale in about a week or so, or even the shortblock, I'll be thinking about it REAL hard. I'm just right down the road. what would you take for the shortblock if I picked it up?

 

How much for the shortblock..thanks

 

All PM's replied to. Check your boxes fellas.

 

Shortblock pending sale. I am parting out the rest.

 

I'll take the head gaskets if they are .040 for the 3.905 bore. Give me the part numbers.

Mike V

 

Part # C5788-040

 

All Pms replied to.

 

Bump to the top

 

List Updated.

 

I want the 7.425 pushrods, sending pm

edit: bought them from someone else already

 

have any parts left

 

Lifters, cam, and timing chain still available.