Various 02 fbody parts.
06-16-2008, 11:24 AM
#1
Various 02 fbody parts. I am in the process of doing an LS1 swap with a friend of mine and we have items up for grabs. Mileage is approximately 18k on items but not exact being motor is a bone yard motor.
02 LS6 intake, intake rubber gaskets have been removed otherwise complete. New gaskets are approximately $50 from stealership. $275 shipped SOLD
02 fbody throttle body. Untested appears stock and everything seems straight and good to go. All sensors and pieces present. $55 shipped.
02 LS1/LS6 fuel rail. Nothing noticably wrong, just replaced with new intake on motor. $40 shipped.
02 fbody LS1/A4 wiring harness. Harness has a two flaws. The bone yard that supplied the engine/harness cut the pigtail that goes into the passenger compartment. Easy enough fix, but here is the real kicker. Either the guys at the bone yard were idiots or the vehicle was hit super hard in the right side. One of the 80 pin connectors going into the PCM is broken. It doesn't appear that any of the wires are ripped or damaged but the one 80 connector needs to be replaced. If you have one off another harness it's as easy as swapping pins over. All other parts of the harness seem AOK $170 shipped
If you want pictures PM me or email me at jsimmerman@hotmail.com and I can get em to you. Thanks a bunch
Jason
02 LS6 intake, intake rubber gaskets have been removed otherwise complete. New gaskets are approximately $50 from stealership. $275 shipped SOLD
02 fbody throttle body. Untested appears stock and everything seems straight and good to go. All sensors and pieces present. $55 shipped.
02 LS1/LS6 fuel rail. Nothing noticably wrong, just replaced with new intake on motor. $40 shipped.
02 fbody LS1/A4 wiring harness. Harness has a two flaws. The bone yard that supplied the engine/harness cut the pigtail that goes into the passenger compartment. Easy enough fix, but here is the real kicker. Either the guys at the bone yard were idiots or the vehicle was hit super hard in the right side. One of the 80 pin connectors going into the PCM is broken. It doesn't appear that any of the wires are ripped or damaged but the one 80 connector needs to be replaced. If you have one off another harness it's as easy as swapping pins over. All other parts of the harness seem AOK $170 shipped
If you want pictures PM me or email me at jsimmerman@hotmail.com and I can get em to you. Thanks a bunch
Jason
Last edited by kossuth; 06-17-2008 at 11:18 AM.
