Innovate Wide Band O2 Sale! LC-1 LM-1 XD-1
#1
Innovate Wide Band O2 Sale! LC-1 LM-1 XD-1
We're having a sale on the Innovate wideband O2 setups.The sale will end on Saturday, September 24th (one week). This is not a group purchase. Your kits will ship as soon as they are ordered as long as they are instock.
LM-1 Air/Fuel Ratio Meter (KIT) $324 + s/h
http://www.eadperformance.com/catalo...roducts_id=461
Includes: LM1, Bosch 5-wire Wideband 02 Sensor, Analog Output Cable, 10ft. Sensor Cable, 10ft. Power Cable (Cig), 6ft. Serial Cable for PC Connection, Bung/Plug Kit, Software CD, and Quick Start Guide.
LM-1 Kit with RPM Converter (LMA-2) $400 + s/h
http://www.eadperformance.com/catalo...roducts_id=463
Includes: LM1, RPM Converter (Aux Input #2), Bosch 5-wire Wideband 02 Sensor, Analog Output Cable, 10ft. Sensor Cable, 10ft. Power Cable (Cig), 6ft. Serial Cable for PC Connection, Bung/Plug Kit, Software CD, and Quick Start Guide
LM-1 Kit with AuxBox (LMA-3) $560 + s/h
http://www.eadperformance.com/catalo...roducts_id=462
Includes: LM1, AuxBox (LMA-3) Input Accessory, Bosch 5-wire Wideband 02 Sensor, Analog Output Cable, 10ft. Sensor Cable, 10ft. Power Cable (Cig), 6ft. Serial Cable for PC Connection, Bung/Plug Kit, Software CD, and Quick Start Guide
LC-1 wideband controller with 02 Sensor $180
http://www.eadperformance.com/catalo...roducts_id=460
XD-1 Standalone Gauge Kits (XD-1 Guage with LC-1 wideband kit) $360
http://www.eadperformance.com/catalo...Path=41_62_124
XD-1 Programmable Digital Gauges $207 + shipping
http://www.eadperformance.com/catalo...Path=41_62_124
All Accessories offered from Innovate are also 10% off. We have most of them on the website. If you dont see it, then ask, we should have it. Pretty much everything is in stock at the moment.
http://www.eadperformance.com/catalo...Path=41_62_124
Thanks for checking
Tim @ EAD Performance
LM-1 Air/Fuel Ratio Meter (KIT) $324 + s/h
http://www.eadperformance.com/catalo...roducts_id=461
Includes: LM1, Bosch 5-wire Wideband 02 Sensor, Analog Output Cable, 10ft. Sensor Cable, 10ft. Power Cable (Cig), 6ft. Serial Cable for PC Connection, Bung/Plug Kit, Software CD, and Quick Start Guide.
LM-1 Kit with RPM Converter (LMA-2) $400 + s/h
http://www.eadperformance.com/catalo...roducts_id=463
Includes: LM1, RPM Converter (Aux Input #2), Bosch 5-wire Wideband 02 Sensor, Analog Output Cable, 10ft. Sensor Cable, 10ft. Power Cable (Cig), 6ft. Serial Cable for PC Connection, Bung/Plug Kit, Software CD, and Quick Start Guide
LM-1 Kit with AuxBox (LMA-3) $560 + s/h
http://www.eadperformance.com/catalo...roducts_id=462
Includes: LM1, AuxBox (LMA-3) Input Accessory, Bosch 5-wire Wideband 02 Sensor, Analog Output Cable, 10ft. Sensor Cable, 10ft. Power Cable (Cig), 6ft. Serial Cable for PC Connection, Bung/Plug Kit, Software CD, and Quick Start Guide
LC-1 wideband controller with 02 Sensor $180
http://www.eadperformance.com/catalo...roducts_id=460
XD-1 Standalone Gauge Kits (XD-1 Guage with LC-1 wideband kit) $360
http://www.eadperformance.com/catalo...Path=41_62_124
XD-1 Programmable Digital Gauges $207 + shipping
http://www.eadperformance.com/catalo...Path=41_62_124
All Accessories offered from Innovate are also 10% off. We have most of them on the website. If you dont see it, then ask, we should have it. Pretty much everything is in stock at the moment.
http://www.eadperformance.com/catalo...Path=41_62_124
Thanks for checking
Tim @ EAD Performance
#6
To the guys that have scanners/tuners (EFILive, HPTuners etc) you will want to get the LC-1 as its cheaper. The scanner should have an input for 0-5v which will work with the LC-1.
If you want to connect it to an AFR gauge, it needs to be 0-5v and it should work just fine.
If you want to connect it to an AFR gauge, it needs to be 0-5v and it should work just fine.
Trending Topics
#8
Originally Posted by ROCNDAV
OK, another dumb question.
I take it I will have to weld another 02 bung onto the exhuast pipe for the LC1 to mount to. WHere does someone with tru duals mount this? If I go with Y pipe set up, then I take it I mount it after the Y merge?
I take it I will have to weld another 02 bung onto the exhuast pipe for the LC1 to mount to. WHere does someone with tru duals mount this? If I go with Y pipe set up, then I take it I mount it after the Y merge?