mach1 vs 03 cobra
#1
Launching!
Thread Starter
Join Date: Sep 2005
Location: tokyo japan
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
mach1 vs 03 cobra
well i finally figured out that i was experiancing spark blow out so i changed plugs and put a .38 gap in there. well a guy that works in my squadron has an 03 mach1 with a cai,raised shaker, and a catback, also an m5. vrs my cobra with a 2.8, cai, and a catback.
First race was from a 40 roll; three honks and i instantly jump 2 cars on him and by 110 had probably 10-12 lenghts on him. 2nd race from a 40 roll and pretty much the same results only i took it up to 130 and put 2-3 more lengths on him than the previous. 3rd and final we went from a dig. lined up three honks and he puts about 3 cars on me from the launch thanks too wheel hop/ spin i hit 40 grabbed second got traction and stopped his pull, now about 2 cars back and pulling hard by the end of 2nd he was at my door, i hit 3rd and start walking let off in 4th at 140 a good 6 cars out and still pulling. that was my excitement for the night.
First race was from a 40 roll; three honks and i instantly jump 2 cars on him and by 110 had probably 10-12 lenghts on him. 2nd race from a 40 roll and pretty much the same results only i took it up to 130 and put 2-3 more lengths on him than the previous. 3rd and final we went from a dig. lined up three honks and he puts about 3 cars on me from the launch thanks too wheel hop/ spin i hit 40 grabbed second got traction and stopped his pull, now about 2 cars back and pulling hard by the end of 2nd he was at my door, i hit 3rd and start walking let off in 4th at 140 a good 6 cars out and still pulling. that was my excitement for the night.
#2
Yeah, but put a blower on the mach...LOL...sorry, I just had too.
Seriously..sounds like a good time, and I am not surprised at all. The mach is probably !280-290 RWHP, and your Cobra is what?...430 RWHP?..........sounds like fun....
Seriously..sounds like a good time, and I am not surprised at all. The mach is probably !280-290 RWHP, and your Cobra is what?...430 RWHP?..........sounds like fun....
#5
Originally Posted by Publix
Clash of the low 13 second titans
low 13s?...are you that dumb?
Yes, the mach is a low 13 second car...but the cobra, is probably a high 11 second car (track/driver pending of course).
#6
TECH Resident
iTrader: (3)
Join Date: May 2006
Location: Enid, OK
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ponygt65
Yeah, but put a blower on the mach...LOL...sorry, I just had too.
Yeah! Imagine if Ford had the ***** to put a blower on the Mach1
Cool kill man!
Did the guy with the Mach1 expect to win, or was he just having fun?
I'll have to look at some "raised shaker" pics...I've never heard of that.
#7
Originally Posted by rk_2000_Z/28
Yeah! Imagine if Ford had the ***** to put a blower on the Mach1
Cool kill man!
Did the guy with the Mach1 expect to win, or was he just having fun?
I'll have to look at some "raised shaker" pics...I've never heard of that.
Trending Topics
#8
TECH Resident
iTrader: (3)
Join Date: May 2006
Location: Enid, OK
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ponygt65
If anyone that reads this is interested in seeing what this looks like..PM me, I will send you pics of my wife's 1" one piece chaker (email needed of course).
#9
Launching!
Thread Starter
Join Date: Sep 2005
Location: tokyo japan
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
he knew he was going to lose just not that bad. and if my cobra only dynos 430 it will be sold it should be 445-460ish compared to all the other 2.8s out there most average 450.
#10
Launching!
Thread Starter
Join Date: Sep 2005
Location: tokyo japan
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Publix
Clash of the low 13 second titans
#11
TECH Fanatic
iTrader: (1)
Join Date: Apr 2006
Location: Edgewater, MD
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ponygt65
If anyone that reads this is interested in seeing what this looks like..PM me, I will send you pics of my wife's 1" one piece chaker (email needed of course).
-noah
#12
Pics sent to those that asked.
Jester - 430 was a 'safe' guess. Most that are 450-460 are also running a midpipe that open up the breathing even more. But, as well all know, cars, dynos, and tunes vary. Nice terminator.
Jester - 430 was a 'safe' guess. Most that are 450-460 are also running a midpipe that open up the breathing even more. But, as well all know, cars, dynos, and tunes vary. Nice terminator.
#13
11 Second Club
iTrader: (20)
Join Date: Oct 2006
Location: Virginia
Posts: 3,131
Likes: 0
Received 0 Likes
on
0 Posts
h/c
Originally Posted by rk_2000_Z/28
Yeah! Imagine if Ford had the ***** to put a blower on the Mach1
Cool kill man!
Did the guy with the Mach1 expect to win, or was he just having fun?
I'll have to look at some "raised shaker" pics...I've never heard of that.
if ford were to be stupid enough to put the cobra blower on the machs 11:0 compression engine it would blow all to hell.they are blowers desined for the mach but only 3-5 psi.this was not even a race.the same car with 150 more ponies.not a kill.i thought this was a lsx forumif i wanted to here mustang races id go to the corral or some other mustang forum
#14
On The Tree
iTrader: (3)
Join Date: Jul 2005
Location: Tha Cuntree
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 5_02ls1
if ford were to be stupid enough to put the cobra blower on the machs 11:0 compression engine it would blow all to hell.they are blowers desined for the mach but only 3-5 psi.this was not even a race.the same car with 150 more ponies.not a kill.i thought this was a lsx forumif i wanted to here mustang races id go to the corral or some other mustang forum
#15
11 Second Club
iTrader: (20)
Join Date: Oct 2006
Location: Virginia
Posts: 3,131
Likes: 0
Received 0 Likes
on
0 Posts
owned more stangs than you will ever see
Originally Posted by grey03mach1
It is obvious you don't know Mustangs so quit pretending now what your talking about. Actually our cars have 10.1 compression and our blocks are good up to 10 lbs boost with a conservative tune. 8 lbs is the average boost ran on a stock mach block.
#17
TECH Enthusiast
iTrader: (1)
Originally Posted by 5_02ls1
if ford were to be stupid enough to put the cobra blower on the machs 11:0 compression engine it would blow all to hell.they are blowers desined for the mach but only 3-5 psi.this was not even a race.the same car with 150 more ponies.not a kill.i thought this was a lsx forumif i wanted to here mustang races id go to the corral or some other mustang forum
Grow up man, its a car enthusiast site, not an LSX only site. In addition, i love to hear about ANY fast car, So before you state any more closed minded opinions, please think first. haha
#18
On The Tree
iTrader: (3)
Join Date: Jul 2005
Location: Tha Cuntree
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 5_02ls1
ive owned built more mustangs than you will ever see kid.you are full of bs the mach cant hande that kind of boost.the mach engine is based onthe 97 thru 99 cobra engine.the only difference is higher compression .blowers and h/c dont mix
Fourth Paragraph: http://www.musclemustangfastfords.co...mach1_mustang/
Third Paragraph: http://www.motortrend.com/features/p..._mustang_mach1
Prochargers SC for the Mach are running a minimum 8 lbs and 10 lbs for the bigger unit.
I am not going to argue with someone that is so far off the mark its not even funny. It makes me feel sorry for your mother when I read your responses. I don't know much about the LS1, therefore I don't pretend to be an expert on the subject. I guess your need to fit in overshadows your actual knowledge of the subject.
btw- I'm not a kid. I'm a 30 y/o, 6'3", 240 pound white boy. I do have a kid that is more mature than you. So....that makes you what????
#19
Administrator
Originally Posted by 5_02ls1
you are full of bs the mach cant hande that kind of boost.
Originally Posted by 5_02ls1
blowers and h/c dont mix
Nice kill on the Mach! You might want to close your plug gap down
a little more...35 or so.