Independant Rear???
#1
Launching!
Thread Starter
Join Date: Dec 2001
Location: Indiana
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Independant Rear???
Does anyone know of anyone who has sucessfully put an IRS setup in an LS1 F-Body? I had heard someone saying something about swapping one from a C-4 for like $9k+ but didn't know if anyone had done it yet?
Just Curious,
Mike
Just Curious,
Mike
#3
On The Tree
Join Date: Nov 2001
Location: Burleson, Texas
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Re: Independant Rear???
well... it can be done...
you're pretty much going to have to do the work yourself though...
it shouldn't cost you 9k unless you pay someone to do it for you
you could get a corvette rear out of a junk yard for probably around 200-1000 dollars...
IRS isn't a legal modification for competition in certain Classes.. that's why you don't hear much about it
you're pretty much going to have to do the work yourself though...
it shouldn't cost you 9k unless you pay someone to do it for you
you could get a corvette rear out of a junk yard for probably around 200-1000 dollars...
IRS isn't a legal modification for competition in certain Classes.. that's why you don't hear much about it
#4
Staging Lane
Join Date: Apr 2002
Location: Bay Area, CA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Re: Independant Rear???
Mike,
I also was looking into this a while back. I've been so busy at work I haven't had a chance to follow up. Anyways, here's what I know. No one offers a kit to install IRS in our cars. People have done custom setups in 3rd gens, haven't seen any 4th gens, 3rd gens used C4/C5 IRS.
There've been some shops that have claimed that they will/are developing kits. Probably all of these are BS.
I have a link to one place I contacted www.precisionbrakescompany.com . Daryl said that they might make a setup for 4th gens, they currently make 8.8" custom IRS setups for Cobras. He sent me the dimensions of the IRS, and I was supposed to see if it would come close to fitting. That's when I got very busy, but I'll be working on the car this weekend and will see if there's any chance it could fit.
Later, Dave '01 WS6 T/A, '91 GTA
I also was looking into this a while back. I've been so busy at work I haven't had a chance to follow up. Anyways, here's what I know. No one offers a kit to install IRS in our cars. People have done custom setups in 3rd gens, haven't seen any 4th gens, 3rd gens used C4/C5 IRS.
There've been some shops that have claimed that they will/are developing kits. Probably all of these are BS.
I have a link to one place I contacted www.precisionbrakescompany.com . Daryl said that they might make a setup for 4th gens, they currently make 8.8" custom IRS setups for Cobras. He sent me the dimensions of the IRS, and I was supposed to see if it would come close to fitting. That's when I got very busy, but I'll be working on the car this weekend and will see if there's any chance it could fit.
Later, Dave '01 WS6 T/A, '91 GTA