Heads/cam install shops
09-11-2015, 06:21 AM
#1
Teching In
Thread Starter
Join Date: Sep 2014
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Heads/cam install shops Well its getting closer to that time to take the car in to add the fun stuff. I've been looking at 21CMC, LG Motorsports, or AMP. Any feedback on any of these shops would be great. Like quality of work, customer service, and tuning. Looking at after the new year or may thanks
09-11-2015, 12:09 PM
#4
Teching In
Join Date: Nov 2008
Location: Royse City
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
AMP all the way no questions asked!! I have had work done by AMP and 21st. AMP is the best bang for the buck and they also have the best tuner in DFW maybe Texas they know they're stuff
09-11-2015, 12:56 PM
#5
Teching In
Thread Starter
Join Date: Sep 2014
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
09-11-2015, 02:36 PM
#8
Teching In
Join Date: Nov 2008
Location: Royse City
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
yes its Advanced modern performance in arlington and they are checking my tune for me on my f-body had someone else do the top end on it and tune it but something just don't feel right and didn't really make any power
09-11-2015, 06:55 PM
#9
The BEST tuner in DFW... Prolly in the state..?? Come on man.! That's a pretty broad statement... What exactly do you base that on? I'd love to have you elaborate. What was wrong with Matt @ 21st? You compared the two... so I am assuming that you have used both.
"Bang for buck"?? What exactly does that mean? So Sam is doing initial tune and then someone else is going to tune...? That doesn't even make any sense.. ?
"Bang for buck"?? What exactly does that mean? So Sam is doing initial tune and then someone else is going to tune...? That doesn't even make any sense.. ?
09-12-2015, 12:27 AM
#10
The BEST tuner in DFW... Prolly in the state..?? Come on man.! That's a pretty broad statement... What exactly do you base that on? I'd love to have you elaborate. What was wrong with Matt @ 21st? You compared the two... so I am assuming that you have used both.
"Bang for buck"?? What exactly does that mean? So Sam is doing initial tune and then someone else is going to tune...? That doesn't even make any sense.. ?
"Bang for buck"?? What exactly does that mean? So Sam is doing initial tune and then someone else is going to tune...? That doesn't even make any sense.. ?
09-12-2015, 08:58 AM
#11
Sore spot...? Not at all.... I am very confident in my engine builder and tune.
The OP came in inquiring about local tuners. I weighed in on who I use and that the others mentioned were good as well. chrisLT1 made a broad statement that I asked for him to expand on? Do you have something constructive to add? Or are you gonna cheerlead from the sidelines?
The OP came in inquiring about local tuners. I weighed in on who I use and that the others mentioned were good as well. chrisLT1 made a broad statement that I asked for him to expand on? Do you have something constructive to add? Or are you gonna cheerlead from the sidelines?
09-12-2015, 03:33 PM
#12
Teching In
Join Date: Nov 2008
Location: Royse City
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
I have seen some awesome tunes that sam has done on some really complicated builds I have used sam several times and have always left happy so really its just my opinion but if you ask around others will tell you that over at AMP Sam is the best around sorry if I offend the other "tuners" but im sticking with what I know I had tried to use others but Sam always has to clean it up
09-12-2015, 04:19 PM
#13
Yes it does
What's wrong with Matt at 21st? They/He? did heads cam on his car and it only gained 15hp and can't tell him why.
It's widely known Sam builds and tunes very high power cars, and I doubt he has ever done heads cam on a car and it only gained 15hp, if it did I bet he had a good reason and offered a solution. I have noticed people get their feelings hurt by him though. I have known him for 16 years and he's never hurt mine.
The BEST tuner in DFW... Prolly in the state..?? Come on man.! That's a pretty broad statement... What exactly do you base that on? I'd love to have you elaborate. What was wrong with Matt @ 21st? You compared the two... so I am assuming that you have used both.
"Bang for buck"?? What exactly does that mean? So Sam is doing initial tune and then someone else is going to tune...? That doesn't even make any sense.. ?
"Bang for buck"?? What exactly does that mean? So Sam is doing initial tune and then someone else is going to tune...? That doesn't even make any sense.. ?
It's widely known Sam builds and tunes very high power cars, and I doubt he has ever done heads cam on a car and it only gained 15hp, if it did I bet he had a good reason and offered a solution. I have noticed people get their feelings hurt by him though. I have known him for 16 years and he's never hurt mine.
09-12-2015, 04:28 PM
#14
Sam just recently tuned my SS and have no issues.
Daniel @ Simple Quick Racing tuned and installed my heads/cam formula over 10 years ago with no issues to date.
Daniel @ Simple Quick Racing tuned and installed my heads/cam formula over 10 years ago with no issues to date.
Last edited by joeformula; 10-05-2015 at 09:20 PM. Reason: Gave credit to wrong person for tuning my car
09-12-2015, 08:10 PM
#15
Sore spot...? Not at all.... I am very confident in my engine builder and tune.
The OP came in inquiring about local tuners. I weighed in on who I use and that the others mentioned were good as well. chrisLT1 made a broad statement that I asked for him to expand on? Do you have something constructive to add? Or are you gonna cheerlead from the sidelines?
The OP came in inquiring about local tuners. I weighed in on who I use and that the others mentioned were good as well. chrisLT1 made a broad statement that I asked for him to expand on? Do you have something constructive to add? Or are you gonna cheerlead from the sidelines?
09-14-2015, 08:26 AM
#18
Teching In
Join Date: Nov 2008
Location: Royse City
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
its best to call the shop if he dosent answer then you can talk to anyone about it just ask if you can get scheduled in for a tune someone will either put him on the phone or fit you in somewhere
09-15-2015, 08:51 PM
#20
Teching In
Thread Starter
Join Date: Sep 2014
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
I called the shop and talked to Surge to get a price for heads/cam/stall install. He told me to email Bryan so I did. I'm waiting to hear back but I know they're busy. Surge told me that they were moving into another shop.