Best GLUE for automotive plastics?
#1
Best GLUE for automotive plastics?
Seems like every time I take some plastic part off of my car some little tab breaks off , that being said what is some SUPER glue for plastics, not the walmart super glue, some killer strong glue for automotive type plastics?
#3
Staging Lane
iTrader: (-1)
Join Date: Feb 2010
Location: Edmond,Ok
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
gorilla glue expands and even though it gets hard it also gets brittle and snaps just like plastic. I prefer any type of 2 part epoxy that you mix together or jb weld works well also...
#4
sawzall wielding director
iTrader: (4)
My preference is 2 part epoxy. You can also reinforce the crack with a piece of fiberglass cloth. You can also use fiberglass cloth with super glue, which is a lot quicker, but more prone to cracking. The fiberglass cloth and epoxy has some give to it whereas the fiberglass cloth and superglue tends to crack instead of flex.
#5
I have had great experience with Plastix, which is basically a 2 part epoxy. I have heard of people using fiberglass clothe with great success, however I have never tried it.
#6
When i worked at home depot a few years ago i did a couple demo's of 2part epoxy's. There a few different brands that HD has, but they will hold just about anything together
#7
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,241
Likes: 0
Received 81 Likes
on
72 Posts
My preference is 2 part epoxy. You can also reinforce the crack with a piece of fiberglass cloth. You can also use fiberglass cloth with super glue, which is a lot quicker, but more prone to cracking. The fiberglass cloth and epoxy has some give to it whereas the fiberglass cloth and superglue tends to crack instead of flex.
Trending Topics
#9
On interior parts Hot Glue works great, If you make a backing plate from scrap, and use the Industrial Strength glue, not the normal craft stuff. The heat melts the plastic and then glues it together. I've made many tabs and such and they hold better than new.
#10
TECH Addict
iTrader: (5)
I used premium grade construction adhesive to glue parts to my stock plastic intake manifold. The parts will not come off. It is urethane based, look for that on the label. It's a completely different formulation from Liquid Nails. It cost twice as much as Liquid Nails, about $4 instead of $2.
Last edited by MikeGyver; 03-14-2010 at 09:07 PM.
#11
TECH Regular
iTrader: (3)
Join Date: Feb 2009
Location: Mooresville, Indiana
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
i vote replace the plastic piece most of them are relatively inexpensive
i know its not what you asked its just my preference now cuz im tired of gluing my fingers to everything im using super glue on
i know its not what you asked its just my preference now cuz im tired of gluing my fingers to everything im using super glue on
#12
Go to a hobby shop, the r/c airplane guys use it alot (i had one when i was a kid).
It's good plus you can buy a spray called accelerator, not sure the exact name, it basically makes it dry even quicker and I think makes it stronger too. You can hear it cracking and tightening up when you spray it, pretty crazy stuff.
The one I used had a blue or purple top, but they make different ones for different stuff. Like the one guy said it makes it warm and helps melt it and yeah dont get it on ur hands. It feels like second skin and will stay on your fingers for days.
It's good plus you can buy a spray called accelerator, not sure the exact name, it basically makes it dry even quicker and I think makes it stronger too. You can hear it cracking and tightening up when you spray it, pretty crazy stuff.
The one I used had a blue or purple top, but they make different ones for different stuff. Like the one guy said it makes it warm and helps melt it and yeah dont get it on ur hands. It feels like second skin and will stay on your fingers for days.
#13
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,604
Likes: 0
Received 6 Likes
on
6 Posts
Depending on what you are trying to do, weatherstrip
adhesive (basically black contact cement) may do the
job; I like it for things like speaker grilles because it
kills the buzzing, and it stays flexible.
If you can find 3M marine adhesive, that stuff won't
let go for anything but a knife. I've seen it in black,
though white is easier to find (tan, you're on your
own - though "Liquid Nails" (construction adhesive)
is close.
adhesive (basically black contact cement) may do the
job; I like it for things like speaker grilles because it
kills the buzzing, and it stays flexible.
If you can find 3M marine adhesive, that stuff won't
let go for anything but a knife. I've seen it in black,
though white is easier to find (tan, you're on your
own - though "Liquid Nails" (construction adhesive)
is close.
#14
Well after much reading and since it was under $5 I tried loctite's plastic bonder, its a 2 part kit and so far it seams to work good. After I did the repairs, I went back and used my glue gun to "reinforce" the glue joints, worked for me, YMMV
Product specs:
Product specs:
LoctiteŽ All Plastics is an advanced plastic bonding system that repairs any plastic surfaces guaranteed
LoctiteŽ All Plastics works on all hard and soft plastics. It even bonds hard-to-bond polyethylene and polyproplyne materials
All Plastics also bonds plastic to other materials such as metal, wood, paper, and ceramics
All Plastics is easy to use. Simply apply the Activator using the felt-tip applicator, wait 1 minute, and apply the Glue!
LoctiteŽ All Plastics is an advanced adhesive system for super strong rapid bonding. Works on all-plastics/all-materials including hard to bond polyethylene and polypropylene. No mixing required. Simply prime and glue.
LoctiteŽ All Plastics works on all hard and soft plastics. It even bonds hard-to-bond polyethylene and polyproplyne materials
All Plastics also bonds plastic to other materials such as metal, wood, paper, and ceramics
All Plastics is easy to use. Simply apply the Activator using the felt-tip applicator, wait 1 minute, and apply the Glue!
LoctiteŽ All Plastics is an advanced adhesive system for super strong rapid bonding. Works on all-plastics/all-materials including hard to bond polyethylene and polypropylene. No mixing required. Simply prime and glue.
#16
I recently had to put a piece of plastic back on my bumper together after it broke. I would always use gorilla glue or crazy glue religiously without thinking about other alternatives. I just figured that is what you suppose to use.
After reading this post I am going to try epoxy. I been reading other places and that type of glue is also recommended.
http://deviceraters.com/top-3-glue-for-plastic/
I going to try buy epoxy and see how it holds up, if not I'll just stick to what I been using before.
After reading this post I am going to try epoxy. I been reading other places and that type of glue is also recommended.
http://deviceraters.com/top-3-glue-for-plastic/
I going to try buy epoxy and see how it holds up, if not I'll just stick to what I been using before.