97 WS6 Trans Am LS1 Swap
#1
Teching In
Thread Starter
iTrader: (43)
Join Date: Feb 2009
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
97 WS6 Trans Am LS1 Swap
Year: 1997
Make: Pontiac
Model: Trans Am
Price: $7100
Mileage: 0
Private or Dealer Listing: Private Listing
Location (State): IA
Color: Beige
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
White 1997 Trans Am WS6. Car is a roller right now as I was in the middle of a swap. White exterior, neutral interior. Seats and all panels will be from a very low mile Camaro and look like new. Sits on 17x9.5 front, 18x10.5 rear chrome C6 Z06 replicas with new rubber out back. I have a brand new BMR K member that will go with. The motor is a stock LS1 from a 2000 Camaro with 5400 original miles. Tranny is from the same car, same mileage. I swapped the rear end from the Camaro in as well. Suspension wise, it has what I think is a Spohn adjustable torque arm, sub frame connectors, rear sway bar, hotchkis rear control arms, and panhard bar. The body is in pretty good shape with just the bumpers missing a little paint. I am sure there is much more, I can answer questions in PM's or by phone, 712.779.0694 call or text.
#7
Teching In
iTrader: (1)
Join Date: Aug 2004
Location: Omaha Nebraska
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Unless you changed any of it, it is all BMR stuff: extreme duty torque arm, sub-frames, upper panhard bar (for larger exhaust), panhard rod, lower control arms, and Xtreme duty drag race rear sway bar. The front K-member was the PA chromemoly unit for an LT-1, but since your plan was for an LS1, I can see the need for a different one! Good luck with the sale.
Trending Topics
#8
TECH Fanatic
iTrader: (177)
Yeah sorry, Old photo. I tried to be as simple as I could. Right now the LS1 is not installed, but it will go with the car.
I think you might get more people interested if you tittle it a little more accurately, something like
"FS 1997 Roller WS6 + LS1 motor"