WTB 98/02 camaro or trans am clean condition
#1
WTB 98/02 camaro or trans am clean condition
Hi I just sold my camaro and I am looking to buy a new car.. Here is what I am looking for
No more then 17k
Clean/mint condition
Nothing over 90k miles
No rebuilt or salvage title cars
No JUNK
I want a car that's been babied
I would prefer a m6, but a built auto and stall car will also consider
I am looking for a v8 car , no v6 cars
Non nitrous cars
I would like the cars to have the following:
Cam/heads and bolt Ons, if your car is only Bolt on or cam only that's fine
A car with a 9inch or 12 bolt rear end
A car with a built trans, or clutch work
A car that has a 7/10 exterior
A car with 8/10 interior
I like cars with racing seats, sound systems, aftermarket wheels, ect
I would love a silver, som,or red car.. But I would also consider black , pewter,blue
I would a car with t tops, if not that's fine
I would a CME car , if not that is ok
So if your car has some of this let me know, but please no junk, no cars over 90k even if the motor and trans only has 20k
No stock cars that cost 15+k I want a modded car
And no cars that have or had spray!
Also I am gonna wanna get the car check out by 2 mechanics before I buy it so cars with no issues please
I am also open to any c5s, or 05/06 GTO s in that range
No more then 17k
Clean/mint condition
Nothing over 90k miles
No rebuilt or salvage title cars
No JUNK
I want a car that's been babied
I would prefer a m6, but a built auto and stall car will also consider
I am looking for a v8 car , no v6 cars
Non nitrous cars
I would like the cars to have the following:
Cam/heads and bolt Ons, if your car is only Bolt on or cam only that's fine
A car with a 9inch or 12 bolt rear end
A car with a built trans, or clutch work
A car that has a 7/10 exterior
A car with 8/10 interior
I like cars with racing seats, sound systems, aftermarket wheels, ect
I would love a silver, som,or red car.. But I would also consider black , pewter,blue
I would a car with t tops, if not that's fine
I would a CME car , if not that is ok
So if your car has some of this let me know, but please no junk, no cars over 90k even if the motor and trans only has 20k
No stock cars that cost 15+k I want a modded car
And no cars that have or had spray!
Also I am gonna wanna get the car check out by 2 mechanics before I buy it so cars with no issues please
I am also open to any c5s, or 05/06 GTO s in that range
#2
Staging Lane
iTrader: (22)
Join Date: Jan 2006
Location: Chas. West Virginia
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
2002 z28
I have a clean and mechanically sound 2002 Z28 with SLP SS Hood and Spoiler. Car has 93k mi. LS6 Crate Engine has 60k mi. 450 RWHP. 5000 Amp stereo system. 410 Moser 35 spline Wave-Trac rear-end. Spec 3 clutch. 6spd tranny. 90 mm TB, 90 mm intake. Platinum 6640 Yella Terra Rocker Arms. Lunati 72532 lifters. Magic Stick 3 Cam. Slp Headers.
If you happen to be interested, how would you transact this deal
If you happen to be interested, how would you transact this deal
#3
What do you mean ? ^^ just so everyone knows I am from the states I am only based in Germany I plan on taking a free flight to you an test drive/check the car out and buy it have a trans port truck pick it up and take it to my family's in nm to be stored not hard .. Thanks to AMC termilal I get free flights .. So yeah ..
#4
Staging Lane
iTrader: (22)
Join Date: Jan 2006
Location: Chas. West Virginia
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
2002 z28
Black leather interior w/ air. T-Tops, PW, PDL, Traction Control, Fog Lights.
Pics of 5000 amp stereo system, 2-12" Polk dual voice coil 2800 amp speakers in a Q-Pod enclosure that matches interior and fills the trunk well. Also, 90mm TB and 90mm ported Fast intake sitting on a LS6 crate engine with SLP Headers and ported 12:1 compression 57cc 243 Heads.
Pics of 5000 amp stereo system, 2-12" Polk dual voice coil 2800 amp speakers in a Q-Pod enclosure that matches interior and fills the trunk well. Also, 90mm TB and 90mm ported Fast intake sitting on a LS6 crate engine with SLP Headers and ported 12:1 compression 57cc 243 Heads.
#5
TECH Addict
Join Date: Jun 2004
Location: S. Walpole, MA
Posts: 2,049
Likes: 0
Received 0 Likes
on
0 Posts
My car is for sale. Super clean with super low mileage. A head turner of a car.
https://ls1tech.com/forums/vehicle-c...s-updated.html
Good luck.
https://ls1tech.com/forums/vehicle-c...s-updated.html
Good luck.
#6
Launching!
iTrader: (2)
Join Date: Nov 2002
Location: phoenix,az
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Car has been completely stripped and repainted, black painted panel in rear, was NBM factory, t-tops do not leak, tan/black interior. Car was purchased with 44k miles as a trade in at a dodge dealership 2 years ago in AZ. I dont want to sell it, but at this time I would prefer to have the money.
- 6 liter short block has 50k miles
- fresh portedLS3 heads with PRC EHT .675" springs
- ARP Bolts
- all Gaskets replaced
- LS7 lifters
- Hardened pushrods
- New LS6 oil pump
- TSP 231/236 .641''/.615'' LS3 cam.
- LS3 intake with a edelbrock 90mm tb
- Under drive crank/alternator pulley
- New AC system
- New Serp Belt
- New ac tensioner
- New serp belt tensioner
- New idlers
- Electric fan over ride switch
- SLP air lid
Exhaust
- TSP 17/8" ceramic coated headers
- duals into a bassani x pipe into a 3" Y into a 3" magnaflow
Transmission
- 4L65E Trans Built by Top Gear Motorsports in Az, Has a beast sun shell with all upgraded clutches/steels/ servo ect
- Edge 4k nitrous converter, anti ballooning plates ect
- Trans has 500 miles on it since rebuild
- Rear is the stock 10 bolt with a 3.73 gear, diff cover, factory SLP Posi
- Trans cooler
Chassis/Suspension
- UMI K member
- UMI tubular front upper and lower control arms
- adjustable QA1 coilovers up front
- UMI solid motor mounts
- UMI 3point sub frame connectors
- UMI tunnel mount torque arm
- UMI adjustable panhard bar
- UMI Rear adjustable control arms
- UMI Rear Control Arm Relocation Brackets
- rear shocks are adjustable comp engineering.
Wheels/Tires
- 3" extended stud all 4 corners
- Summit Drag thrust wheels
- ET Street radials in 275/60/15 in the rear
- 26/7/15 MT radial front runners.
Brakes
- Front and rear new cross drilled and slotted rotors
- Front and rear new brake pads
Fuel
- Racetronix pump
- Racetronix hotwire kit
- stock ls1 injectors
PM me if interested.
- 6 liter short block has 50k miles
- fresh portedLS3 heads with PRC EHT .675" springs
- ARP Bolts
- all Gaskets replaced
- LS7 lifters
- Hardened pushrods
- New LS6 oil pump
- TSP 231/236 .641''/.615'' LS3 cam.
- LS3 intake with a edelbrock 90mm tb
- Under drive crank/alternator pulley
- New AC system
- New Serp Belt
- New ac tensioner
- New serp belt tensioner
- New idlers
- Electric fan over ride switch
- SLP air lid
Exhaust
- TSP 17/8" ceramic coated headers
- duals into a bassani x pipe into a 3" Y into a 3" magnaflow
Transmission
- 4L65E Trans Built by Top Gear Motorsports in Az, Has a beast sun shell with all upgraded clutches/steels/ servo ect
- Edge 4k nitrous converter, anti ballooning plates ect
- Trans has 500 miles on it since rebuild
- Rear is the stock 10 bolt with a 3.73 gear, diff cover, factory SLP Posi
- Trans cooler
Chassis/Suspension
- UMI K member
- UMI tubular front upper and lower control arms
- adjustable QA1 coilovers up front
- UMI solid motor mounts
- UMI 3point sub frame connectors
- UMI tunnel mount torque arm
- UMI adjustable panhard bar
- UMI Rear adjustable control arms
- UMI Rear Control Arm Relocation Brackets
- rear shocks are adjustable comp engineering.
Wheels/Tires
- 3" extended stud all 4 corners
- Summit Drag thrust wheels
- ET Street radials in 275/60/15 in the rear
- 26/7/15 MT radial front runners.
Brakes
- Front and rear new cross drilled and slotted rotors
- Front and rear new brake pads
Fuel
- Racetronix pump
- Racetronix hotwire kit
- stock ls1 injectors
PM me if interested.
#7
TECH Enthusiast
iTrader: (2)
Join Date: Mar 2004
Location: Scottsdale, Az
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
I have an 01 SOM T/A with 88k miles. Let me know if you're interested, haven't "officially" listed it for sale yet. A4 with Borla catback, SLP lid, H&R springs, and just put new tires on the ZR1 wheels (275's up front and 315's out back) . Here's the car:
Trending Topics
#8
^^ beautiful car ! Love the color , but gonna have to pass .. Thanks though..
Ok guys I am searching hard .. My dream car :
00-02 camaro ss/z28
M6
Aftermarket clutch
Built/9inch rear end
CME and LTs
Engine mods welcome , basic bolt Ons, or medium cam or small cam car ..
Ported/after market head or stock
Clean car .. I want a car someone babied and loved
And please nothing over 70k miles ..
So that's my dream car as of now .. Pm me or email me so we can talk please ..
Colors I like in this order:
1 silver
2 som
3 pewter
4 red
5 white
6 nbm
7 black
But I can live with the color so email me if your car fits this please ..
My email is camaroboy14@gmail.com
I am looking to buy ASAP so if you need cash I need a car lets do this ..
Also clean titles only ..
Ok guys I am searching hard .. My dream car :
00-02 camaro ss/z28
M6
Aftermarket clutch
Built/9inch rear end
CME and LTs
Engine mods welcome , basic bolt Ons, or medium cam or small cam car ..
Ported/after market head or stock
Clean car .. I want a car someone babied and loved
And please nothing over 70k miles ..
So that's my dream car as of now .. Pm me or email me so we can talk please ..
Colors I like in this order:
1 silver
2 som
3 pewter
4 red
5 white
6 nbm
7 black
But I can live with the color so email me if your car fits this please ..
My email is camaroboy14@gmail.com
I am looking to buy ASAP so if you need cash I need a car lets do this ..
Also clean titles only ..
#9
9 Second Club
iTrader: (14)
I have a 2000 z28 bright red with low miles. engine is a 6.0 ( 392 stroker ) m6, 9 rear by currie with 4.10 locker. engine dyno was 491rwhp and 457rwtq. 4inch exhaust ( no cats ). has large cam also its a solid lift . scat insides, arp bolts. the body is in great shape 9/10 the inside is gray cloth 9/10.this car was posted before but would like to keep it and loose the wife but can't. asking $13,000. e-mail me if intrested
#12
Here's my clean 2002 T-Top SS
Mods: Only 168 miles on new motor
6.0 cast iron block
L92 heads
Comp valvetrain
ECS 226/232 LSA 115 .568/.574
GM water pump
GM Oil pump
JE 9:2.1 Pistons
Manley I beam rods
LS3 Crank
MLS head gaskets
Comp trunion upgrade
LS3 intake mani
ARP rod and and head bolts
KYTP turbo kit w/ TC78
Precision 39mm wastegate
Blox MBC
Tial 60mm bov
2 bar map sensor (tuned on speed denisty)
Linglerfelter reluctor converter box
New crank sensor
GM Balancer
New belt
Katech Timing chain
FAST 92mm throttle body
Fuel
LS1 Seima Deka 60lb injectors
Racetronix walbro 255 and wiring
Trans:
Built 4l60E...locally
Yanks SS 3600 stall
Transgo shift kit
B&M external trans cooler
Stock 3.23's
Stock Aluminum driveline
Suspension:
Stock other than the BMR rear adj LCA's
Wheels:
DJ killers 18's
Toyo proxy T1R's 285/40/18 Rear...still like new
Hancook 275/40/18 front
Misc:
Autometer GM boost gauge
AEM Wideband
HP Tuners w/ logging capability (wired)
I might be missing some items, but this is all I can think of right now.
Mods: Only 168 miles on new motor
6.0 cast iron block
L92 heads
Comp valvetrain
ECS 226/232 LSA 115 .568/.574
GM water pump
GM Oil pump
JE 9:2.1 Pistons
Manley I beam rods
LS3 Crank
MLS head gaskets
Comp trunion upgrade
LS3 intake mani
ARP rod and and head bolts
KYTP turbo kit w/ TC78
Precision 39mm wastegate
Blox MBC
Tial 60mm bov
2 bar map sensor (tuned on speed denisty)
Linglerfelter reluctor converter box
New crank sensor
GM Balancer
New belt
Katech Timing chain
FAST 92mm throttle body
Fuel
LS1 Seima Deka 60lb injectors
Racetronix walbro 255 and wiring
Trans:
Built 4l60E...locally
Yanks SS 3600 stall
Transgo shift kit
B&M external trans cooler
Stock 3.23's
Stock Aluminum driveline
Suspension:
Stock other than the BMR rear adj LCA's
Wheels:
DJ killers 18's
Toyo proxy T1R's 285/40/18 Rear...still like new
Hancook 275/40/18 front
Misc:
Autometer GM boost gauge
AEM Wideband
HP Tuners w/ logging capability (wired)
I might be missing some items, but this is all I can think of right now.