LS1Adam84

iTrader: (21)

Well recently I put a cam in my car..... . LOL

I got everything all in the car runs great all thanks to everyone who helped with the install, krazy4, heypal01impala, zexgx, srj, and morethanqwikstang.

The big thing though was getting my car to CMS and working with Ryne only to find out that the two sets of plug wires I had were bad, we got a set of MSD wires up and on there and got the car tuned and up on the dyno and now she runs like there is no tomorrow. I take back everything I ever said about Ryne... LOL just messin around hahaha.

I recommend him if you want to get your car tuned or you need work done he knows his **** and will help you ou if you ask him for it, he has gone out of his way more than once or twice to help me out.

wickedbluess

iTrader: (20)

What numbers she put down.

LS1Adam84

iTrader: (21)

Lets just say they were great... nahh 375 to thye ground and this is with a LS1 intake and stock harmonic balancer. If I was to get an underdrive and LS6 intake I would pick up a lot more for her.

Fifedogg

iTrader: (15)

Your car sounds great with your new setup and the Magnaflow

MrElectric03

iTrader: (71)

Good to hear you got it up and running!

armkneez8

iTrader: (1)

Awesome! I got to call him for a tune

ss.slp.ls1

iTrader: (36)

Wait, I thought you installed heads and cam?
Even with a LS1 intake that seems pretty low...

LS1Adam84

iTrader: (21)

They are stock casting 241's. with some mill work. Without them being ported and an LS1 intake it will show low numbers. Im not disappointed the car feels strong and runs like a champ.

ss.slp.ls1

iTrader: (36)

Oh, ok, then you're fine. I thought you had ported heads or aftermarket castings.

LS1Adam84

iTrader: (21)

nahh they are just 241's milled .042" nothing spectacular, I will be getting better heads at some point. I figured it wasn't going to make astronoically awesome power LOL. But the intake is restricting a lot of air I am sure, oh well we shall see when I step up.

01SuperSport

iTrader: (7)

^^^^ Yea and you have a stall too correct??? That would rob some power too for sure. Congrats none the less

LS1Adam84

iTrader: (21)

Yeah i have a stall, soon to jump up to a better one, trying to contact the guy who built mine and seeing if i can get him to get one for me, or see what I need to do.

Daz

iTrader: (18)

Where is CMS ? Can Ryne tune a built L98 setup for S/C ? How much does he normally charge for tuning ?

ss.slp.ls1

iTrader: (36)

=>>
Look to the right for a link to their website, they're a sponsor.

LS1Adam84

iTrader: (21)

Shop address:
31947 Corydon St #120
Lake Elsinore, CA 92530
Tech names: Mike
Owner: Ryne Cunningham


(951)471-2898

MrElectric03

iTrader: (71)

I think that would depend on what computer you are using but I'm sure he can help you out, it's definately worth a try.

Daz

iTrader: (18)

Thanks for the info everyone !

krazy4

iTrader: (5)

Congrats on finally getting that bad boy done.

Pulls nice!

nevrlift13

iTrader: (7)

yes it does...

hlaalu

iTrader: (3)

those are some solid numbers. hopefully santa will bring a nice ls6 or fast intake to you this year